flexi

Please Delete thread. Problem solved

Hey guys, This is driving me nuts. I have my artwork done and put a cut box around it with a .02 radius on the corners. Everything looks perfect and checks out but when I open in in production manager and then send it to the plotter (hp branded summa, then again to my big summa T series) the...

I have a 24 Inch Wide roll of this Holographic vinyl material. I covered the senor under the pinch rollers to make the machine think it's filling in the width. How can I set the media on the machine to recognize its shorter and also to get it to stop saying undefined media?

When the guy came to set up flexi he had this image and printed it. We asked for the color profiles and he sent the image and nothing else. I can not for the life of me get my printer to print these colors. Even when I saved that pink and made it a color when I hit soft print it was not that...

So, I upgraded to Flexi 21 from 19 and can't figure this out. My print/cuts on Opus and Opus Extra mode for some reason comes out 15/16" off the actual cut path. Flexi Tech support can't even figure it out they blame summa lol?. I upgraded on my cutter the firmware to the latest. Printer is a...

Setting up our Latex 365 today. is it possible to have the 365 and our 310 connected in flexi basic via ip at the same time? or do i have to reconnect either one each time?

not sure the correct terminology to be using, but effectively I want to contour cut the sticker, then i believer it actually called perf cut a rectangle around the sticker, so that when the job is finished the stickers are basicly just handing onto the vinyl but the corners or something, so that...

Take this example picture. I want to print the entire picture but contour cut where the red line is So I select that red circle layer and choose Effects->contour cut and it selects it correctly for the cut path. But I don't want that red circle to be printed. So how do I delete the red...

Hey all wonder if anyone familiar with flexi 12 starter. I’m downsizing and sold my one of my vinyl cutters with my flexi 12 pro. My dilemma is I thought I could open my fs files in gerber omega ...not. Wondering if I can weld, cutout common etc in the program .ie like picture. Help would be...

Anyone ever seen this issue on an HP 360. For that matter it may be a Flexi problem (presently using the cloud verson). see the attached print. (this happens to be on perf). Seems to be happening randomly near the end of prints. This last one happened three time in a row on the same file.

I'm having some trouble with a print and cut setup with my printer and cutter using Flexi. Not sure if its a configuration issue with Flexi or Saga or something else. The Saga 720p is brand new and I've got some stuff to cut fine with signcut and just cut-only stuff with Flexi. But printing with...

Wondering if anyone has access to Flexi 21 beta? I'm curious how the layered printing options are going to work and if they will support the UCJV. Tom

Im using SAI FLexi with my HP latex setup, it been running AOK for a few years but all of a sudden it slowed down, really slowed down. My PC is a bit of a beast, but all of a sudden the time it takes to generate a job file is massively slow, like 10 minutes from clicking send to the machine...

Question for Mutoh Users - I am printing really a simple Vector File that is full Color (Mainly Cyan) - but Flexi rip gets to 70% and then looses Cyan on Mutoh. I thought it was the head, so cleaned and cleaned and cleaned...you get the point...finally today...replaced the head through SW and...

Here's a question for the Flexi experts: I got a Flexi 13 gift with my new Graphtec CE6000. Cool, right? OK, but it has a couple of irritating issues I expect were done to make you buy the full version. 1. The cursor is locked on touch rather than enclose setting. Would really like to change...

Hello this forum has been pretty helpful so far! I can never get Flexi to control the speed, force, etc on my Graphtec CE6000. I have to manually do it on the machine. I’ve contacted both Flexi and Graphtec and they just told me to reset some things but it didn’t work. I’m mainly looking to set...

Hello I plotted some gift tags and was wondering how I would fill plot certain colors or layers? I just want to fill the names in (see picture). When I click fill plot, it’s gonna fill in everything when I only want certain things. Would I just have to create registration marks and go back over...

Hello there! How would I arc the bottom of a word but keep the top of the word straight using Flexi? I know how to arc and warp text but it doesn’t seem to have this option. Other than arcing a line and dragging each bottom point of the word down to the arc I’m not sure how to do this. Any help...

Cannot cut large graphics?? Has anyone else had this issue? We have a separate printer and vinyl cutter. I can print smaller graphics (about 36") on our Mimaki JV33-130 and then contour cut them on our GCC Puma III (precisely with zero issues) but if I try to do anything larger it cannot read...

I need help converting a flexi format file back to eps format? If you someone knows how, just add your email and I will forward you the file. Thank you!!!