help please

Morning All, I need some help with my print software for the Epson Sure Color S40600 we use Onyx Postershop but my layout tool isnt working properly where the preview isnt showing up. I have tried multiple files and different resolutions. I have attached some images to show what it is doing. I...

Soooo many problems with this first generation flatbed non-hybrid UV printer from Roland since 2017. Currently....a frequent Scan Motor Error 0040. One of the suggestions found here is to run the Limit Position Initialize except there's a problem doing that: once you get to the "Setting Up the...

Hi, It's my first post here although I've been looking through many of the information hosted here... I've built a system that puts a barcode on everything I print, all the reg marks according to the size of the document (so if your document if 50 feet long, it'll put the marks accordingly)...

Hey all, My job wants to start pulling our stickers in house and I was chosen to be the man to figure everything out. Someone bought us a Roland LEF2-300 for doing our polycarbonate second surface stickers which I think I have decently figured out over the last year of messing with it. The next...

Hi Everyone, I got a request to apply some decals to a portable hand wash station that popped up everywhere after Covid. What material do you guys use to wrap them? It is the plastic, not the aluminum style. I am thinking standard cast either 180 or 1105 but wanted to see what everyone else...

I have an HP latex 54 cutter that I use with Onyx thrive 18.5 I did a reinstall in the software last week and now my OPOS will not read the registration marks. It will begin to read the barcode and look for the registration marks. It then goes .25 inches to the left and goes in circles looking...

Looking for some help on this font. I can't find a match. Thanks for help in advance

Hey guys, and gals, I am looking for a printable frosted vinyl. I know there is the cut film but here is what I am trying to do. Customer is turning an old airstream into a food trailer. They want the windows "blocked out" but something a little classier than just white vinyl with their info...

Hello All ! Machine - Mamaki cjv30-100 My black disappeared mid print which i suspected was the damper, it was late at night so i just set my head to soak overnight and when i came to change the damper in the morning my yellow had also gone. i swapped dampers on both and but only my black has...

Hello guys i'm new here, i recently got a mimaki ujf 6042mkII but i'm having some troubles ink filling, can someone help me please?

Hey there! New to the page. I bought this printer (Roland VersaCamm VS-540i) used back in October of 2019 and I have had nothing but issues with this printer. I don't use it enough and I've had to buy the print heads 4 times now. I installed new print heads because I moved and the printer was...

Hi All, forgive my cluelessness here... I just bought my first solvent printer, an old SP540v and think I made a big mistake in taking out the carts while transporting it home on a crazy-hot day a week back. Before buying it (about an hour away) I saw it print and it had a good nozzle check. I...

Sorry to bother again. New Omega 6.5 Windows 10. Gerber specific USB adapters for LPT to Edge and COM for HS15 Plus. Did a simple lay out and printed just fine Can not get the cutter to cut! Tried Test Cut Tried some random shapes Played install re install on and off and etc & nothing. Any...

Hello, I'm having this error code 2320 and I have found the original producer error code list, but it is not listed. I replaced my wiper blade and yet I am still having my issue. It isn't allowing me to even move the carriage. Any advice?

My JV5-160S printer is ready for alignment, the only issue is that when I do Y base alignment I get different results without even adjusting the alignment. I think this could be a X-axis issue but am not sure. I have cleaned the encoder strip controlling the X-Axis with no luck. Any Suggestions?

Hi I'm searching print head Xaar 126/35 For printer Infiniti fina 320b, where l can buy? Plz help

I was recently offered this machine for 100 bucks if i would just come pick it up, it is remarkable clean and the guy who owned it is a friend who is moving out of state and only had room to pack his 2 roland machines so his loss my gain right.. now the iffy bit, the machine boots up with an...

Hi, I have a Roland sp540v. Started having issues with printing cyan after July long weekend. I have replaced the printhead and dampers. I did all the head alignments and the test prints were good. It printed one file well, it was mainly cyan. Then went to do another print and three quarters of...