hp latex 310

Hello! I am new user of 310 (got it used). Loaded brand new roll of ORAJET 3164G. It prints fine for 6 inches and then goes very wrong. My best result was 20 inches of good print, but then I get small white spots and they get very dense and then you can see the result in photos attached...

I apologize if this isn't the ideal forum for this topic. We are having major issues with our Latex 310. The left side of the heating element is not getting up to temp and our prints are coming out still wet on that side. It's also revving up and running VERY loudly and high-pitched, although...

Hey all. I've been wondering how far I can push my ink cartridges. I'm using HP Latex 310, and the cartridges are 775 ml. I was told by my sales rep to replace inks as soon as the machine says they're low, which usually happens around 100ml. This seems kind of insane to replace such a huge...

We found a textured material that would be perfect for us, but it's 20 mil thick, and the max mil thickness that our HP Latex 310 can supposedly handle is 19.7. Has anyone here pushed the mil thickness limit on their machine before? .3 mil doesn't seem like a huge amount to go over by, but I...

We've been getting error code 16.13:10 for a few weeks now. We would restart the printer and it could be fine for a week and then pop up again. Yesterday we got the same code, so we took the front cover off and cleaned the dust out of the fans with canned air. There was A LOT in there. After we...

I was wondering if there is a way to make a contact sheet on the HP 315? I want to send my customer a variety of exposures and saturations so they can pick the value they like best and I can match it exactly whereby cutting down on subjectivity. Any ways to do this through the FLEXi software or...

as

I have a HP Latex 310 printer. I understand that it's capable of printing to fabric (table cloths, flags, etc.). I have not tried it myself yet. I'm just wondering if anyone has had success printing to fabric and what kind of material did they use.

For anyone in the Northeast (US) interested in obtaining a letter of intent (LOI) toward the purchase of L310, 330 or 360: DaVinc Technologies is holding an open house and 360 demo this Tuesday in Enfield, CT. This month is $2000 off the 360, $1000 off the 310 and 330. I know people always ask...