laminator

Hello Signs101 - I'm looking for some feedback on GFP Laminators, how do they work, are they durable, do they track well, etc. We've had a Seal and a Drytac laminator, I was looking at a Flexa but it won't be available for several months and we need a laminator badly. We've also considered...

I have a Royal Sovereign RSC-1650H that is in need of service. The roller when engaged down will not move forward, but when you raise it a tiny bit to take off the pressure, it will then go, but then there are bubbles on the print....so we have a problem. The emergency buttons are not engaged...

Hello All - I'm in the market for a new laminator as well as an applicator table. I'm currently considering: 1) Seal 62 Pro D (already have one that is about 7 years old - runs well) 2) Kala Minstral 3) CWT Galaxy -- For Applicator Tables I'm considering: 1) CWT Evolution 2) Kala...

Laminator: Royal Sovereign RSL-2702, about 3 years old Can anyone tell me why this is happening? I'm laminating cardstock pages of an emergency checklist binder with a kind of thick 5mil laminate. Normally I run everything fine at 248 degrees (F) and on speed 5. Well, none of the 40 or so...

Hi all, I am wondering if there is a laminating film that will give the printed material a rough feel. I have a sample of Drytac's Sand Laminate but that is way smoother than I'm looking for. I want to feel big bumps or something like that. Any ideas? Thanks so much! -Amber...a newbie

It is always something.... What is causing this mess with my older Seal 600c Laminator. It now does this more times than not, It is costing me a fortune eating sheets of vinyl like a flock of birds to seed. It is not a heat assist, I have checked feed in, making sure it is feeding straight...

I have some old equipment I need to get rid of. $800 takes both. The Mutoh printer is fully operational and has a media take up roll on it but it needs a new print head and lines. I used this printer up until a few months ago but not daily so little by little the head became clogged and it has...

Hello, anyone using Italian Xlam 1600 Cold 2.0? I am looking to buy one and want some reviews.

I'm looking for a cold laminator that can help me do one-offs. I currently have a 60" Royal Sovereign laminator but I don't want to have to switch out the rolls when I have a one-off type job. Does anyone have any feedback on a manual cold laminator like this one...

Hi all! We are in the market for a new 60" laminator. Heat not necessary, but will be considered. We currently have a seal 54 base that loves to skew left. We need to upgrade size anyway so we can lam 60" vinyl for wraps. Suggestions of what brands to look at and what to stay away from...

Hello, We are looking for a roll printer and a laminator. Cold or hot is fine. Please contact me if you have these items for sale. We are located in Houston, TX. Will travel in about a 5 hour radius for these items. Thank you! Christina - christina@builderdisplay.com

Hello all, I am needing some suggestions on which type of laminator to get. The company I work for purchased a Roland TruVis VG2-540 and I am extremely new to using it. Well anyways, I have been trying for months to get them to purchase a laminator because we will be printing 20x10 second...

I have an Endurlam2 54'' laminator and it is having issues tripping it's breaker on the back. It will turn on and but as soon as you hit the foot control to run material through it trips the breaker. I switched out the speed controller box and the fuses but this didn't fix the issue. Let me...

I have a Arkane 1650 65" that was purchased new for $14k. Still in excellent condition 240v - so heats up to 240degrees and has more pressure than the 110V Kala Arkane. Its at a great price point at $8250 and can be converted if someone does not want to run the 240v Pickup in North Texas...

I am looking at buying a new laminator. We do a lot of vinyl prints for vehicle wraps, decals, etc... also a lot of mounting onto Alupanel sheets from 4X8 to 5X10. We presently use an EZ Taper that has served us well over the years. What is everyone using for vinyl wraps and board mounting and...

Hello All - When we first started 10 years ago, we purchased a Drytac JM 63 Pro MD, it's been a great machine over the years, and for the price, it was a great investment. Now, the JM 63 Pro MD is ready to retire, and I'm wondering if anyone has a recommendation for a replacement machine in...

Hello all, We are about ready to drop our laminator off the edge of a cliff into the ocean! About half the time the laminator works fine, but then the other half of the time we get wrinkling in the media parallel to the rollers, and it is almost always in the last half to last quarter of the...

Seal Image 600 Laminator. 60", Dual Heated Rollers. Good working condition. Upgraded and no longer needed. Will not ship, must pickup. Zip code for pickup is 30513. Willing to trade for? Copies of FlexiSign maybe? Make offer, just need gone so I can have the space. Let me know what have.

Rite_Laminator by Lee Ferris posted Oct 22, 2019 at 1:41 PM Rite-Laminator - 55" Cold Roller with Take/wind up. A high quality, yet affordable solution to produce high quality finished graphics for several applications within the sign making process. e.g. pre-masking, lamination & mounting...