laminator

Hi! I have a RSC-1401HW Laminator and when I power it up, it just has a constant beep. I checked and neither of the emergency stops are depressed. The one on the front would just spin when trying to disengage it, so I pulled the cover and tightened it back up. They both seem to work fine now. I...

PRICED to Sale as a COMBO $15,000.00 FOR BOTH (YES BOTH) Laminator and Color Printer with WARRANTY (purchased December 2017) NEVER used Laminator Roland used less than 10 times since 2017. PICTURES listed are the actual products (not stock) (Must pick up) located 15 miles South of Downtown...

I work for an ambulance manufacturer. We mostly cut vinyl but we do have a 10 year old Summa DC4sx printer that desperately needs replacing. I believe it was around $9-12K when purchased and would say we have about $15k to spend. This printer is suuuuuuper slow and cranky as an old man yelling...

Hi! My new to me (used) seal 62 ultra needs some love. a: The middle of the top roller seems to touch before the rest of the roller. b: How do I calibrate the height setting? c: Service manual available anywhere? d: When I turn it on, I have to push the start button like ten times to get the...

This laminator has only been used a couple of times. We bought it 4 or 5 years ago for backup but never needed it.

Time for a new laminator in the shop. Looking to go above 60in to better work with our 64in printer. We currently have a Royal Sovereign 55in that has served us well for the past 6 years. Only problem i've had with the RS is that it is a laminator at an entry level price that requires expert...

I have heard arguments both ways, to buy a heat assist laminator because when laminating printed material whether it's vinyl, Dibond or coroplast, heat assist produces a higher quality product. I've also been told that the benefits of heat assist are minimal and not worth it. What do you think?

I am looking for a used heat assist laminator. I've seen new laminators on eBay from USA Stock & Ving that are under $2000. Does anybody know about these or have a laminator for sale? Thanks

We will be replacing the upper nip roller on out AGL. We were planning to do this in house. Have any of you had experiencing replacing a roller/have tips/tricks to make the removal and install easier?

Up for sale here is a used, LEDCO 30" laminator. I bought it a few years ago along with some other sign equipment. I had to re-wire it to get it to work. I did put a variable speed switch on it. The foot switch, emergency stop buttons, and forward and reverse switch do not work. Just don't...

Selling our Mutoh 1624 64" solvent printer along with LEGAL copy of Flexi Sign & Print installed on a RIP box and our US Tech 65" wide format cold laminator. Mutoh is just over 3 years old with take-up reel, PERFECT nozzle check, not 1 nozzle missing. (See pics) Prints banners, posters, car...

Hi all! I'm building a worktable for all purpose in the shop. So this table will be put behind a future laminator (GFP or Royal sovereign 55") so it can take whatever comes out of the laminator without any height difference. What would be best height for my table? Thanks.

Hey all - we have a laminating table from CWT that's a pretty heft piece of equipment and are looking for materials regarding maintenance. Not so much an issue as possibly the start of one - the rolling arm of this beast is gradually getting harder to push and pull as well as making more...

I having some problems with my laminator that I'm hoping someone can help with. When I run my cold laminator, the film starts out nice and smooth. As I am half through laminating my print, i start getting wrinkles in the film. I'm very new to using a laminator so I hope this is an easy fix...

I'm with an Endurolam 54" laminator. I'm laminating 51" prints. All the paper rolls I'm finding are 48" max. I need one roll to use for 54" laminate and then will use that media's laminate's liner as slip paper once the current roll is used up. Any ideas? I've seen some shops not use the...

What exactly are the benefits to a heat assist laminator compared to straight cold? Do I need Heat Assist? I am upgrading my printer to a Roland TruVis and definitely need to get a new laminator. I'm just not sure if the heat assist is needed or not. We have a cold laminator now and it does...

I do not know where the manual is for this off hand. It is brand new and I have Oraguard reverse wound laminate. The roll I had before was not reverse wound and it was fine. In the past I had an old laminator and I could use reverse wound and regular without issues. I am starting to think it is...

Looking at purchasing a printer mainly to do labels and our smaller sized stuff. We already have a Roland large format printer and large laminator. We still have our 30" laminator. Apparently the SG model uses the 500ml bags which you save about 20% vs buying 2x220ml cartridges for the VSi...

Very well maintained Mimaki JV 3 SPII 54" printer for sale at low low price of $3950 -includes completely un-used Raster-link software and profiler that came with printer.Also have Onyx Production House version 7.3.2.16 and X-Rite DTP-20 color profiling system loaded on Dell computer for $1000...

Mutoh Valuejet 1324 & valuecut bundle: $11,500 GFP 63" heat assist laminator - Very new.Has been used for 5-10 rolls of laminate at most. $5,500 Willing to deliver within 1 hour of Westchester County NY