nozzle check

Hello everybody! Greetings from São Paulo, Brazil! I work with an Epson S40600, I always try to print as carefully as possible and part of that care is doing a nozzle check almost every time I change media or between different types of prints. The problem is that we usually end up losing a...

I'm working on the Epson SureColor S70670 and my Cyan/Magenta heads are clogged. I can't seem to get any progress here. Every nozzle check after cleaning countless times is the same issue. Any experienced insight would be very helpful. Thank you.

Hi I have noticed the cyan nozzles have become slightly deflected and I am wondering if this is something I should be concerned about? The machine is 2 years old and has had the following work on it done Cap Top Replaced 6 Months Ago Wiper 2 weeks ago Pump still on Original never replaced...

Hi everyone. Could someone please clarify why if we print a nozzle check in the morning once the machine has been left its blurry / fuzzy but if we do one after printer its clear. Please see attached photos Thank You

Good afternoon, we've been having problems while cleaning the heads of our Epson S40600, the problem is that the nozzle check doesn't appear complete, we have some holes on the proofs. I attached a picture of it. Is there any recommendations we may try to fix this problem?

We have a SQP ORYX3 printer, 7 months old and nozzle check isn't as perfect as in the beginning anymore. Here are the pictures of nozzle check before and after 7 months. Nozzles are all but don't spray straight anymore. Nozzle checks before 7 months: Nozzle checks now: (Click on image...

My black nozzles keep fluctuating wildly between cleanings. Printer has new dampers and o rings, new cap top on the maintenance station also new print head, cables and maintenance station within the last few months. I can't seem to figure out what is causing this. There is ink flowing through...

On a Mutoh ValueJet 1614E machine the nozzle check for one side of black ink was not perfect. I had a clogged nozzle from some time and I tried to unclog it. I pulled some cleaning liquid through the nozzles. Gentle, without pushing hard until all the jets were clean and parallel. I mounted the...

Hi, all! Hope you can help. I'm running an XC-540, and when I run a test print, everything looks normal except that half of the magenta pattern just doesn't print. Anyone seen this before? Thanks!

Coming here from Luminous Landscapes. I hear this is where the printing pros hang out. I'm looking for a printer diagnosis based, if possible, from nozzle check patterns. I'm attaching a photo of two from dates one month apart. As you can see, the yellow and LLK are getting worse. These two...

Hi guys! I am new to the forums and glad to be here. I purchased a 4 yr. old Mutoh Valuejet 1304 about a month ago. It is in great shape. I finally got RIP software to run it about 3 days ago. Until then, I had it plugged up and left it in sleep mode, waking it up several times a day to a nozzle...