nozzle

So this past weekend had a bit of vinyl printing and must have missed the heat settings, got some tunneling and noticed a few head strikes when I came back to the machine. Looks like it hit in about 4 different spots at different times. So I ran a nozzle check and sure enough there is about 4 to...

Hello, I'm having issues with a nozzle, on the nozzle check I get a lot of interrupted lines, and while printing posters the colours are of course all messed up because the magenta isn't flowing properly. Also, while printing - I notice there are a lot of horizontal lines on whatever area...

Hello, My Mimaki CJV30-60 was left sitting idle for a whole year. The nozzles were working perfectly before then. So I recently changed the dampers, tubes and capping station. I also gave the printhead an overnight soak. I went into options and selected Ink Fill Up. Still nothing was coming...

Hi there, Just yesterday I changed all 8 dampers on my Mimaki CJV30-100 with cheap Chinese dampers (complete with O-ring and screwcap). I bought the machine second hand and have the machine for 1,5 year now, so probably about time. Hoped it would solve some of the banding I can't seem to get...

My 1204 has been acting up for a while with banding in blue and green colors. 1440X720 and 1440x1440 printing masks the problem mostly. The one-button nozzle test from the control panel shows that all cyan jets are firing as they should. But, a self-diagnosis nozzle test print shows a big...

Can anyone help me with addressing this issue as it seems to be getting worse over time. Nozzle Check is fine. Printer is 6 months old and regularly maintained and cleaned. Using oracal 3169gra with the proper print profile and the effect is fine and wave .

Every morning we run a nozzle check, the last 2 weeks we have been getting a media jam error anytime we run a check. It will print the patterns but the carriage will stop in the middle then give me the error message, so each time we have to power down the printer and back on again. This...

Hey guys, A couple of days ago we started having an odd problem with our SJ-1000. All of a sudden half of cyan and half of black started dropping out for no reason. We haven't been able to resolve it and I've listed the steps taken below: - Performed printer cleaning cycles (which often...

I have attached a picture of the test pattern from our JV3-160sp. One recent Monday morning the test pattern showed this missing block in one of the yellow patterns. Although it looks like a head strike and a possible damaged head, there is no visible sign of damage by looking at the head from...

It's been a while since I have posted- so hello, My name is Glenn and I am in Macclenny, FL just outside of Jacksonville. I was hoping someone has seen a nozzle check like the attached pattern and can give me some insight. I have soaked the head, completed 2 heavy cleanings and replaced my...

this is Harry Plotter from Santiago Chile (sorry aobut my english) We have our JV3-160 ...about 14 months ago, everything was ok, on january we change to bulk, Lyson, (the only one that arrives this sides). We do our cleaning regularly, and about 2 weeks ago, i note a white banding...cause... 4...