#onyx

Using Onyx Thrive v24 and cutting on a Roland VP-540. When I send the print back through via CutServer, the force defaults to 60g. No matter what I set it to in Onyx, even setting to use the machine defaults, it always goes back to 60gf. Even the cut speed goes back to 30cm/s. Up speed does not...

Hello everyone! We're still in the process of setting up our shop from the ground up and, while I've worked in the industry for 3ish years (largely self-taught and nearly no professional training), I've never set up communications between machines before. I'm having some issues sending cut...

I have a few problems with the layout tool. 1. The layout tool is not sending files to printer (Epson R5070) and crashing when I hit cut and print. 2. Cut files are being "warped?" as in cut lines are not even close to what has printed (1/2" off left and right). This is not a cutter alignment...

Hello, I have an HP700W and an Onyx Thrive 22 Rip and I was wondering if anyone on this forum has this configuration and was able to set up ink calculations within Thrive 22. I have watched videos and have talked to the Onyx Thrive techs with no luck. Basically the goal is to be able to pull a...

Howdy y'all, I'm trying to solve a problem that we're running into. We just recently installed a new EFI Pro16H UV-led printer, and we're looking to start insourcing jobs that require clear vinyl so we can utilize the white ink printing on the Pro16H. We currently offer stickers on white vinyl...

Hi there. Perhaps I'm just doing everything all wrong, but when I print on my Epson S60600, laminate, then cut on my Graphtec FC9000-140, I always end up with the "R" barcode facing out when working on roll-to-roll. It's a massive pain to have to rewind the entire roll through my laminator just...

Recent windows updates screwed over Onyx and couldn't get it to load past the splash screen. Uninstalled it and tried reinstalling it. Froze and license confirmation. Tried a few times. Same thing. As Admin. In Safe Mode. Avast disabled Onyx tech support, tried and same thing. Purged system of...

I'm hoping someone can help with an issue I'm having. I have a job where I'm printing a few hundred client supplied pdf files, we are printing, laminating then cutting them out on our summa flatbed. I setup a quickset in onyx 12.2 to automatically put a through cut line around the perimeter of...

Hi all, I'm pretty new to the vinyl/printing world. The programs we work with are Gerber>Onyx GamaPrint RipQueue>SureColor 80600. I would prefer something besides Gerber but I'm working with what we have. I'm trying to print an image with white behind it. I finally figured out how to print...

I have a Roland VG2 with the orange and green color configuration. Most of my designs I create in Illustrator cc. Versaworks that comes with the Roland has colour palletes that i can use in Illustrator aspecially for the orange and green colours. I was wondering how that goes with Onyx...

Hi you all!!! I am so extremely tired of my Graphtec FC8600 cutter that always cuts 2 or 3 times and makes a mess since it potentially will deep through the backing of the vinyl. Does anyone know if it any setting in Onyx since it does fine with CuttingMaster4?

Why would our FB550 flatbed automatically set margins (seems random) when I send a file to it from Onyx? (see attached photo) I've looked through media settings in onyx and cant find anything that might explain it. I've looked back through some of the stored files in the 550 and the phantom...

Hi there! I have an issue with my Onyx RIP software and my Summa S160 D series plotter in that when I use Flex Cut and set my settings to a variety of numbers (currently Full Pressure: 350 Cut Length: 154 Flex Pressure: 350 Flex Length: 39) it cuts circles first with half circles and then ticks...

Hi, I have long rectangular image, 10 inches wide and several feet long. I need to print it on 54 inch wide paper, and I would like to print 5 copies of this image one beside another. I use Onyx Thrive 11.1.2. Is there any way to load this single image into Onyx and somehow instruct it to print...

Hi all, We have Onyx Thrive 11.0 installation package, which would not install on Windows 10 Pro. The installation fails after installing dongle drivers inside hasp_windows_52775.dll. Onyx claims they officially support Windows 10 starting from version 12, but they performed testing of version...

Hi! We have two Mimaki flat-bed UV Printers, a JFX200-2513 and a JFX200-2531. We currently use RasterLink 6 as our RIP software but we want to start putting a color management system in place so we can calibrate the machines to match color-wise. They both use LH100 inks, the 2513 is set to CMYK...

Here is an interesting question that I don't know if anyone can answer. I am not new to the printing world, but have learned a lot over the years. I'm new to Signs 101, and it my first post, and not sure how to go about posting a question in the correct topic, but I was wondering about...

It bothers me that I have not been able to find an answer to what I'm assuming is a no-brainer question. We use Onxy PosterShop to operate our printers and for the life of me I haven't been able to figure out how to automatically increase the space between each print. Can anyone advise please?

Hello! I need help with some vertical banding I'm getting on the Siser ColorPrint PU material. We have a HP Designjet L26500 Latex Printer, and we use the Onyx Rip program. I'm not sure if we are using the incorrect color profile (even though we are using the suggested from an HP tech), or if...

So we’ve recently switched to onyx (18.5) and I have a few things I’d like to do but haven’t found out how yet! Basically I have a job for 2000 different, numbered decals that need print and cut, onyx wants to just print them all at once, but we don’t have a take up roll on our laminator so...