I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
For starters, I don't want another printer, just want to upgrade/fix this one as everything else is working fine to date.
My issue is with the color blue coming out as mauve, and accuracy (for that color) has deteriorated over the past few months.
Not an ink or profile issue, and having a...
Hey there,
I just purchased ecut for Adobe illustrator after trying the demo, but realizing that I was limited to access .. so I thought.
In the demo all my shapes seemed to be stuck in a bounding box causing so much waste, but would demonstrate how it nested. Understandable, so I went for...
We are having trouble with laminate peeling off our printed vinyl. I will attach pictures for reference. We do have angles holding these signs in so friction could be an issue but we have done it this way for years and most have no problem. We are printing with HP LATEX 315 Printer onto 3M...
Printer was printing black fine, but the other colors weren't printing unless I changed the black cables to them. I replaced the print carriage board (part W701588210) and now the led on the board blinks and the other end of the printer clicks when trying to turn the printer on. Does anyone...
Hi can anyone help when I print some of the darker colours they are not not merging properly see photos any ideas would be greatly appreciated
Room temperature is good
Printer heater 38
Dryer 48
Printed on high quality setting 1040 dpi
And tried on 720 x 720 dpi
Still not rite
I also had...
Hi can anyone help when I print some of the darker colours they are not not merging properly see photos any ideas would be greatly appreciated
Room temperature is good
Printer heater 38
Dryer 48
Printed on high quality setting 1040 dpi
And tried on 720 x 720 dpi
Still not rite
I also had...
Hy everyone,
We've just got a used Latex HP 360 printer in the workshop but the printer display a Yellow Broken bag error 26.06.10. We are new with these printers and not having any experience with theses.
Any help on this will be welcomed:)
François
Hey guys, this is my first post but I’ve gained a lot of knowledge on the forum from you guys. One of the things I’ve learned is the combo of a Summa S2 with HP Latex. I’ve been used to a Graphtec FC5100 for the past few years and it has never let me down. The S2 is a different story.
I am...
Hi,
I was having problems cutting into my print which is Substance motocross Vinyl and Substance motocross laminate using the Graphtec FC8000. I gave Graphtec a call and they said I needed a different blade and said I need a 30 degree CB15U-K30 blade and the holder to suit which cost me £122...
We are in the middle of a 200 roll project, so we bought an additional 570 to compliment or other 570 and 365. Well this brand new machine (less than 1 week old) will not track straight at all... walks 2+" to the left every time and now I come in this morning to continue printing and there is a...
Hello, I have been using 3M IJ180 CV3 for about 7 years now and since late 2015 I have been having more and more instances of the same problem. I have posted pictures to hopefully help with the description but basically there are random areas where the backing will not stick and it seems like...
Hi everyone,
I am a newbee here. I am having issues with my Mimaki CJV30-130 banding. I feel like I have tried everything but I doubt that, I come from a Roland background and when moving companies I didn't get much training on the Mimaki before the previous person left. I go on Maternity leave...
We have our Q500 4'x8' for about a year and a half - operational about a year. When it was delivered we ran through massive issues for a few months incurring losses as we couldnt print anything or market our business. Lost a whole season.
Finally they narrowed down last issue to bed being...
Hello,
Running HP L25500 with onyx 10. I am having colour problems after recalibrating profiles using the recalibrate button in onyx 10. Using the built in eye on the machine. Sometimes the profiles recalibrate fine and sometime the results are very dark across the board. The medias I am...
I had a hard to deal with customer a while back- he had issues with absolutely everything we did for him.. and when he got his order, he made sure to complain some more! He said we overcharged him and that our quality "wasn't good" and he could get it cheaper and better somewhere else (yeah...
Hi there, i hope im posting in the right place.
I have a mutoh valuejet 1614 printer. and the black doesnt want to print. it prints for a little then fades then nothing. any info or advice would be greatly appriciated.
Hey just wondering if anybody has run in to this problem before and if they had any solutions. We are kind of out of the way of any technicians.
http://dl.dropbox.com/u/62247391/printerbelt%20noise.mp4
I've been using Benjamin Moore Impervex Latex High Gloss Enamel and a high quality roller sleeve for painting HDU and MDO signs, and I've been getting a rough orange-peel texture. This is especially a problem on the MDO, on which I usually have to apply vinyl. The vinyl just does not adhere...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.