roller

I'm talking about the expanding core "flange wheels" that press into the ends of a roll of inkjet vinyl to hold it up/off the media rollers. I finally broke one of the the OEM Roland ones that came with my printer, and I'm in need of some replacements. I'd prefer to not have to spend...

We have a Summa S2160T. We print groups of labels back to back. Nothing fancy just rectangles with rounded corners about 2 to 3 inches wide by about 15 to 16 inches long. We group them in 2 row groups to make cutting them down easier. The past couple days I noticed about every 4th or 5th group...

Hey guys, I have had this summa plotter probably for less than a year. It has recently started acting up. Whenever i put in a new roll, it goes through all of its starting motions but then it either tries to unwind the whole roll or it shoots it out the back. The rolls just keep on going until...

I noticed the vinyl on the right side is not be held down by the pinch roller and was wondering if it's time to replace the entire pinch roller or just the wheel. I am not receiving any error message about the pinch roller. Thanks Jim

Hi All. As Title says I'm having a problem with my Seal 54 Base laminator. Two days ago whilst the machine was in standby mode with top roller heater switch turned OFF the roller started to heat up on its own? I immediately unplugged power from wall. I have had a quick look inside and no fuses...

Hello, I got a hold of a used laminator. Seal 62 Ultra S. I don't know of its condition before acquiring it. I'm trying to figure out how to get it to work properly. The machine does have a push pedal. When I turn on the machine, it powers on. I'm able to push the down arrow and get the roller...

EZ Roller demonstration on UTube , does anyone know where they are from? The table and roller carriage look simpler and less expensive than a rollsover or cwt table. The video is downloaded from AuRaDevServices [Automation and Rapid Development Services] Where in the heck is that? I am...

Hello, I know I am new here, been lurking for a while and finally signed up to post. I have a fabrication company that has moved into printing and needs a laminator for my business. I can build a flatbed laminator, the only problem is I have not used one and did not look at them at SGIA. I have...

I took an old Gerber Solara Ion X flatbed printer out of service. After robbing it of all useful parts I am making the flatbed into something similar to a rolls roller. I have the bed, bearings and rails from the 5'x10' printer. I still need an actual roller. I'm thinking maybe a roller from...

Have a customer that wants to match the color exactly from his vans. The only match is Oracal intermediate vinyl. I need to put a 8" stripe down the length of the 26' box truck with rivits. Do you think I could use the roller pro tool for the intermediate vinyl, or would it only work with wrap...

Hey guys, We're in a bit of a pickle down here in Kiwi land. Our Roland CX-500 is playing up (even though it's just been serviced) and refuses to stop rolling media backward. We can't seem to be able to interact with the control panel properly either, although the LCD screen lights up as per...

Hi Folks... wee question,... is there a max size or a .plt file before a print and cut printer gets confused and stops rolling the roller forward. On items where my plt file is over 300 sometimes it decides it doesnt like the file and the roller stops moving but the cutter keeps cutting and...

All of a sudden, my xc540 keeps giving me the "pinchroller error, invalid right position". My service rep thinks that it is the cable that runs to the tool carriage. So we replaced it and it did not fix the problem.(and yes, we double checked that everything was connected back to the circuit...

I have an old Daige II Laminator. One of the roller skins has been damaged and is in need of replacement, but Daige told me they no longer sell a roller skin with a 2-inch ID, but rather 2-1/4"ID only. I'm wondering if any other models of any other laminators use a 2-inch ID and if anyone...

:thankyou:I have a client who wants a rolling shade with a digital image printed on it that they can roll up and down as needed for shade. I was refered to INSOLROLL but I don't want to become a dealer and they refered me to a retail dealer who's going to give me retail -10%. any other companies...

Does anyone have a problem with an orange peel paint texture? A lot of times, I paint MDO and apply vinyl to it, but the vinyl does not stick well to the orange peel texture. I'm not setup for a sprayer, so I really need to get a smooth finish somehow with a roller. I’m using Benjamin Moore...

I've been using Benjamin Moore Impervex Latex High Gloss Enamel and a high quality roller sleeve for painting HDU and MDO signs, and I've been getting a rough orange-peel texture. This is especially a problem on the MDO, on which I usually have to apply vinyl. The vinyl just does not adhere...