Search results

Sasser cutpro was a waste of money big time. You can still make bad cuts where you cut closer to one edge. I never wrap around the edges more than 1/8. After 10+ years and 1000s of cars i have never had a single issue with vinyl lifting. If you do commercial wrap try to cut in an angle like how...

have you mess around with it and that's why they broke or they broke by itself?

Thanks for the reply. Are you talking about the little nipples on top of the printhead?basically the nipple of the dampers?

UPDATE: I don't want to jinx it but it looks like it was just a bunch of air in the system. After half a dozen cleaning ( 3 powerful and like 4 medium cleaning) the black never went out so far. I was able to print the top of the side which is like 200 inches if not more. Didn't do any cleaning...

the sprinter is almost like 280 inches or something. first it printed 110 then went out. came back immediately after 1 powerful cleaning. printed like 70 inches. powerful clean. was all good again and printed another 70 inches or so. powerful clean and i am printing with medium cleaning every 15...

Hey everyone. My first ever issue with my printer. The warranty was over just 2 months ago and now 1 of the black ink won't print. I keep doing test prints and the right black goes out almost completely. I do a medium or powerful cleaning and it comes back %100 then after 5-10ft of printing it...

Eventually, you will need to remove those wraps. no ij175 for me.

Yep. something like that happened to me a couple times. One customer told me they will never ever attempt to remove vinyl ever again even if they get paid $75. The other one told me he is more than happy to pay me $100 per hr next time but he won't ever touch vinyl again. lol

They always wanna know if you accept credit cards as a form of payment. ( Or what type of cards) They wanna know if you are the owner and they are always in the hospital with some shit. Weirdly i always get multiple scam emails and text messages (!) at the same day(s) from different numbers and...

torch > steamer 5 times faster to use torch. a square foot of vinyl took me 1 hour with a steamer and it took 10 minutes with torch. Vinyl was cracked and old. I have tried a few times. Same results. Im done with steamer. Same with IR heater. Takes forever. Torch is faster and softens the...

Im puzzled. what was done in 2016 and what was done in 2013? You biggest problem is using arlon lam. I recommend using avery 1360z instead of 1060. It costs a little bit more but 1060 is very thin and even for the side they only give you 4 yr warranty. hood and roof couldn't be more than 1-2...

I had so many issues with 3m back in the day. Actually i started to have problems with 3M when they had the old air channel in the 180. That was the one with just horizontal lines not the mixro X pattern. Even with right profile and outgas the material was super tacky. If it folded and touched...

I think you are over saturating the red. Looking at yout tiny pics one sharper image shows dark clouds in the red. You are printing way to much red on that material and it can't handle it. What material are you printing on? Try to use a different profile. Not sure what rip software you use. i...

this can happen to any printable material. if you don't wear gloves jut pull the roll forward a foot or two. Then you will print on a part that you surely never touched before. Btw You can also wash your hand and try not to touch every square inch on the media when you load it. I do not use...

If you print with solvent you supposed to let it gas out. Have I seen any vinyl or lamination failed because skipping the gas out process? Nope. Never. BUT! My experience is that some materials especiall 3m 180 vinyls are super crap to install if you don't let it gas out. It softens the glue...

why did you give me a thumbs down?

This should work in photoshop. But you can also open your image in illustrator and do the same thing

This is what i use from amazon and its awesome. Also comes with a little storage so you can keep 4 more blades in it. They do not move around in sotrage. PLus the handle is adjustable. https://www.amazon.com/gp/product/B00E1QGNIW/ref=oh_aui_detailpage_o07_s01?ie=UTF8&psc=1 also have you seen...

If you don't want to cut it back just use primer. I don't use clear tape. just primer around the edges. Doing it for several years. No issues.

https://www.the-blueprints.com/vectordrawings/show/16787/hyundai_santa_fe/