Search results

I have a customer who wants 3/4" thick acrylic letters 1" off set of the wall. My concern is the wall is an interior hollow sheet-rock wall. Am I over thinking that this is to far out for the 1/2" sheet-rock to hold with out ample filler in the hole? Or is there an installation option I am not...

It is the Sierra 3500.

Run the roller side to side starting in the middle.(if the ribs are not too deep) Have the graphic tent over all the ribs and just roll in the channels of the ribs. If you use a roller it will be like going vertically but you will be going with the rib and doing the rivets at the same time...

I agree with most of the responses, however I am having the same problem with my VG. Had a VS for 7 years and no problems. Did Crop/Cut alignment, cleaned Decoder strip, use 4 wheels, and put in a new cut strip. I also make sure the file is less than 2ft long. If it is longer than 3-4 ft I...

I would order 18 x 24 blanks and do each 1 at a time. I know this may take a little longer, but I can lay by myself 6 18 x 24 signs almost as fast a 2 people can do a 4 x 8. Than I know the reg is correct. also I can make sure the flutes are correct. However if your concerned about time and...

IT is a long list so I will try. First off it was laying so much ink it was not drying fast enough to even use the take up real, Crop mark sensor would not read the crop marks. (there is an aftermarket filter to put over the sensor) Take up real stopped working had to get a new motor. went...

The ink tank seams fuller than any other printer because of the Cleaning Fluid that also goes through the print heads as well as the ink during cleaning cycles. I have had mine for just over a year and going through Ink is the 1 thing I have not had problems with. Lets not talk about all the...

Run away.

Why are you using Flexi not VS. I have never found that Flexi does a better job than VS

We just got rid of our VS that we had for 6 years. It had Metallic and White. The Metallic was a joke and the white looked more like Etched Glass than white on dark colors. Also it was verrr rrr rrr rrry slow doing ether white or metallic. Our Replacement is the new VG and the white is...

Watsons Signs. Was wondering if a few months later you still like your VG printer. We are have one delivered tomorrow as our VS just blew it's second $3000 print head in a year. I guess 6 years was a good run. What Ink set up do you have? We are getting White ink and was wandering how it...

Use Fellers "Pop Up" non scrim banner. It comes in 36" rolls and is made for banner stands. We use it for pictures in frames as well. it is also a No curl material.

Black Printing We have a Vs as well, I allwase use a RGB black It is much darker and cleaner

bubbles everyone seems to think I am having problems laying the vinyl. Again it lays perfect and looks great for 12-24 hours. after the first 24 hours bubbles then appear and the longer we wait the more bubbles. They are all air not liquid bubbles. My squeegee is fine and I do not need to...

Bubbles We did pop several of the bubbles and they are dry. We did a redo and this time we layed dry ( I didn't know that earyler) and we got bubbles in that one as well, just not as many. It is only 24hr old however.

I am printing on Avery 2920 and installing it onto .060 styrene. It a full digi print, and my table guy is by himself so he installed it wet "splash" The sign looked great, however the next day hundreds of air bubbles showed up making the sign unsellable. Anyone have this problem and how...