Search results

Cast product of choice.... You want 5 years but will you get that from your ink? Cast will get you to your minimum of 5 years but most inks won’t.

Welcome

Welcome!

Showdown (formerly Creative Banner). Supreme retractor. Has a nice hard case. Lifetime warranty on hardware. Easy to change out graphics. Easy for releasing tension and then retention again. They do turnkey....

And we are supposed to know this how??? I’d guess some sort or cast wrap product......

As others have said, you MUST cut the vertical where the pieces of aluminum overlap. Rule of thumb for overlapping panels is back > front and bottom > top You will have to replace the affected pane(s). Your adhesive is now contaminated and failure will continue if you try to fix by “just...

We remove / install / replace. Never had anyone say anything about it. If you do cover/paint. Charge for it. Simple enough

I’ve not seen any templates for these myself. Take pictures and scale them in your design software. From there you can create your own template or just design on top of the images

Clean with glass cleaner not baby shampoo. This leaves a film/residue. With non-air egress vinyls use rapid tac or similar app fluid that evaporates quickly. I prefer the rapid tac. For the Air egress films, NEVER use a app fluid. With proper installation techniques and tools there should...

Having (2) of those machines myself, I’m going to guess that you are going to need new printhead(s). I’d also change out the sub tanks. Those are inside the machine on the right.

What sign supply vendors are you using? Check with them what they carry. For my eco-solvent we use Magic Eco Satin Poster Paper

My guess is that that the paper is not made for eco-solvent printing. Paper probably has a coating on it. That or your laying down too much ink Not judgeing but paper purchased on EBay?

We have it paired with our new HP 570 as well

We have purchased a Summa S2 T160 as well and not a problem. Quite the opposite. We have thrown roll after roll on it with no problems. Tight registration, multiple and different jobs back to back. Auto cutting between batches. We use Onyx and it creates the reg marks. Cutting using the...

That is reflective blue and orange btw.... (3M 680C)

We just did this not too long ago Laid down the blue then the orange over the top of that. Only seam is at the top in the blue. Orange was cut a “v” and stripes Not sure where you can get sheet(s) of chevrons. Just an idea for you

Sorry WYS. I completely missed the printed part. How I have no idea, written right there in your post. Just looked, I posted end of the day on Friday....long week! I agree with CollinsDesign. In the $3500-$4000 range (depending on if it is extended or standard wheelbase) We use 3M or...

Gloss, satin, matte, chrome, “color flip”? 3M, Avery, Oracal, KPMF, other? Emblem removal? Hardware (mirrors etc) removal?

I think you are about to get your 1st learning experience.....

If I’m understanding you correctly, you are putting a graphic over an existing graphic and then removing soon after. Look into the EZ Dot vinyl or the micro-suction type vinyls out there. Easy to install and then remove