• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1.

    Roland SP-300V Contour Cut Issues

    +1 to add a Summa cutter. You'll be happy you did. John
  3.

    Roland SP-300V Contour Cut Issues

    Do you have your blade depth and pressure set correctly? The blade should barely stick out and use only enough pressure to cut through the vinyl. The carriage that holds the blade holder may be the issue. Have you checked it to see if something is loose? It could also be a bad "new" blade. What...
  4.

    Looking for Font

    FrizQuadrataEF SC (Regular)

  5. Wide Format Full Color Printer / Plotter

    I agree. You may find a decent Roland SP300V for 4K and up or an SP540V for 5.5K and up depending on condition and if they have been serviced with good working heads. John
  6.

    Roland VP-540 possible bad head?

    You said you've done several small cleanings and a medium but have you manually cleaned around the heads? Maybe you have something attached to the head that is causing deflection. This video gives you a guide for a manual clean. John

  7. Best printable vinyl to use inside a walk in beer cooler

    Thanks for the info everyone! John

  8. Best printable vinyl to use inside a walk in beer cooler

    It's still being built so a warm install and long-term usage vinyl.

  9. Best printable vinyl to use inside a walk in beer cooler

    Hello Everyone, I'm working on some projects for a convenience store chain. They are interested in putting a printed vinyl design on the wall in a walk-in cooler. The size is approx 2.5ft x 12ft. What would work the best for this project? A good 2mil wrap vinyl? High tack? Any help is...

  10. Any know a similar

    TRy this one. https://www.wfonts.com/font/joan

  11. Unclearable pinch roll errors SP-540v

    100% agree with VanderJ. I had this happen on my SP300V and it was the cut carriage cable. John

  12. Printable "indoor/low tac" vinyl

    I agree. I've had great luck with the 2611 Avery. John
  13.

    Couple of fonts

    Block looks like ITC Serif Gothic Std (Bold). John

  14. Grimco's Briteline Wrap Vinyl?

    I inquired and they said no sample rolls are available. For me it's hard to take the leap without trying a product out but I may if I hear good feedback in the future. Even the salesman I talked to seemed unsure of it's capabilities but compared it to Arlon. John

  15. Looking for a recommendation on a Low tac, removable vinyl

    Oracal 3621. John

  16. SP300V cutter pressure for laminated?

    I agree. It depends on initial blade settings in the holder. I'm at 105 with a new blade and it transitions to about 115-120 as the blade gets duller. Just do your test cuts and adjust pressure until you get the desired results. John

  17. Need Help TrueVis Printing On Orafol 3751 Looks Terrible...

    I love Orafol products but have never had good luck with 3751. About every other roll I ordered was bad. John
  18.

    Can Someone help me with this one

    Looks like it's from the Futura Family of fonts. John

  19. Replacing head vp-540

    I've changed a few heads myself. I never used the pump up etc. I just carefully removed the head. After installation I capped the head and used a syringe to pull ink into the head. Then do all the adjustments which take time but are very necessary to get it to print right. I never entered a rank...

  20. Need Help sp 540v problems

    Are you in service mode? Make sure the head carriage is "locked" in. John

  21. Need Help sp 540v problems

    . John
Top