Search results

need more spec info but here: google: ledco laminator fuse https://www.ledcolaminator.com/index.php?main_page=product_info&cPath=2&products_id=8 https://www.ledcolaminator.com/images/pdf/EP60V2110VACWIRINGDIAGRAMPRM218D.pdf appears to be 3amp

We don't but it's a good idea. Be careful though as we had a location on the coast and tried to change our policy a week before a hurricane was coming and the insurance company refused to do anything until after it hit. Our change was not to try and safeguard us against a storm but just larger...

Go here to this thread. I put the link in it for rolling back that was given to us by SAI tech support. https://signs101.com/threads/link-to-switch-back-from-flexi19-to-flexi-12.154603/#post-1441881

your ink pump motor is overheating usually from dried ink inside the pump lines not causing it to rotate freely or with more resistance then normal. Shut the printer off for about an hour, unhook the pumps completely and let it just spin after you restart it in an hour. The pump motor shouldn't...

what a horrific dramatic 3m presentation. My lunch baggies are marked safe from this carnage.

are you using just designer or are you using the Flexi 19 design and print subscription? What machines are you running with it?

Take a syringe and try to pull ink through the cap top you replaced with the chinese dx4 head bracket first and make sure there is no air leak. You also need to replace the cable to the head if you see a burned end. Just to double check did you replace the head board fuse or a fuse on the main...

How clean is yours? You have never laminated a hair I guess.

Each bank runs it's own fuse. Make sure you always have spare ones around. The chinese fuses can be problematic so go for oem fuses. The issue you find with those DX4 chinese head brackets is they won't seal right making it not fire any ink at all. Sometimes you can hook a syringe to the cap top...

and blow debris all over the print?

I am waiting for someone to recommend putting your prints in a clothes dryer or hang them outside on clothes pins if this keeps going. Until then since you got your profile issue corrected it sounds like to the right media you need to make sure your post heater is cranked to the max and buy an...

You probably blew a fuse on the head board which is easy to pull out and replace. Also you may have had something drop on the connector pins at the head. Try replacing the fuse first and if that doesn't work replace the cables to those heads and then the fuse again. However that head bracket you...

Yeah here is an example of same file and everything out of 12 crop marks and barcode show and print. Flexi 19 cropmarks show and don't print. I think this was partially a flexi driver issue but who knows. Their office has a valuejet and hp latex machines to replicate problems so make sure to let...

sign-in-china.com is where you want to buy the print head from, some of the vendors here use them. I have ordered more heads than I can count and they all worked and showed up in 3 days. Just make sure to checkout using DHL and grab you the matching VING dampers for the head. Make sure to get...

Here is the link we got from support to switch back to Flexi 12 for those having problems. We had major issues with color but the deal breaker even if we re-profiled was Flexi 19 would fail to print crop marks even though it said and showed they were added to the file.... including appearing...

The issue isn't the ink its getting past Rolands new ink bag chip setup. The ink is cheaper per CC because it uses more ink than the prior non VG models print vs print.

The XR640 is 10yrs old using 11+ year old head technology that sports a 15+ year old take-up system that some how some way has gotten worse over time. It's a donkey in a horse race along with their wack VG/VG2. Roland should be embarrassed they even offered you that XR. The Epson S60 dual CMYK...

Looks like paint :D

It's has to be wrapped. Who would do a detail job that good and skip those dirty wheels before a photo.

You don't have a printer problem you got a process problem. Player is right you need to have an outsource option even if you have 2 printers let alone a single 15yr old Roland. Send the boards out to a company like macmedia.com or some of the others that can be found here. I would take every...