Search results

If you use the same ICC with different Rips, your linearisations and ink limits need to be the same as well to start with... it should be possible, but you need to understand your Rips.

Can you ping the printer?

I would say so, but doesn't work.

Since it is out of warranty, nothing will happen. The serial number is also on a sticker on the printer, or in the Peck file, if you ever saved one. You can also see the old number in Versaworks, when you disconnect the printer and start Versaworks and doubleclick on the printer.

There are more sensors involved setting up media. BN-20 can be picky, with the media width. The position of the pinch rollers(the left one is movable only) is checked by a sensor on the carriage. The lever position is also checked by a sensor. Then there is the sheet sensor. Start the service...

Main differences are. 5.X is a PostScript Rip running in 32bit. Dual and VW6 are PDF Rips and the actual 6.x is a 64bit Rip with many additional features. Dual was only availabe for a short time and all the supported devices are also supported in VW6.

Those sleeves are each measured and then grouped to have exactly the same feeding properties on one rod(drive drum). I have seen this multiple times during trainings at the factory in Gistel, Belgium. This is one key factor of Summa's outstanding cutting quality. I have replaced a few of them...

Won't work. 5.51 is the latest version for the XC.

Set it to "linearisation and ink limit only" otherwise the profile will add colors to a 100% black.

Versaworks 5.xx and older used to have problems with CutContour when transperancies were used in EPS files.

So many missing nozzles in M or LM will definitely cause color deviations... Since the overlap seems to be the same over the whole whith of the head, horizontal adjustment is needed. (Bias, or Slant would be needed if you have overlap or gap on top or bottom of the head only)

If the nozzle test is good, it's the ink. (I have seen people trying to print with 90% deflected nozzles...) Bulk systems are generally a problem. (Except if you have a monthly turn around of the ink, but even then you have some year old pigments at the bottom...) I'm not a printer, I fix and...

There should be no need to clean the substrates. If it does, change the supplier and/or operator.

A 11k XR sounds second hand to me.(these are high quality PRO4 Rolands if properly maintained) Maybe you should check the pinch rollers/holders... But then, I'd always prefer a Summa for cutting.

Old Rolands with very old firmware may not recognize cartridges with the latest generation of chips. Update the firmware first, if the cartridges aren't recognised.

Export a PDF from Flexi and send it from Coproduce.

With Summa, it's Flexcut. You probably need to select a different tool number.

OK, this would be my customers duty and risk to get a defective head replaced. I have had very few defective heads (DX4 and DX7 whith one dead nozzle mostly) over the years. (I RMA them no questions asked as certified tech. But when I killed every 10th head, this could be different) If Digiprint...

Changing from color to white/metallic isn't a big deal. The other way is.

How long do you fiddle on a clogged head, until you dump it? The hourly rates around here prohibit that, since you need to replace the head anyway.