Search results

DI water from the gas station for most parts. You can add some windex, as it adds tensides to enhance the cleaning efficiency. If you add some ammonia spirit(max. 1% in the final solution), it's a absolute supercleaner for water based inks.

Dall-E

I'm not into Mutoh's anymore, but if it uses Epson DX7 or the likes, it could be a internal leak in the head. Then, the only remedy is a head replacement.

There is a sheet load in the SP-300V, but it won't measure the length of the sheet. (I never used it back then...)

There is a menu item called cutting priority. Menu or command... standard setting is command, which means rip settings override machine settings.

There is a problem with the last Windows update, but this shouldn't interfere with the panel. Try media setup with USB unplugged.

I think it was copy c:\<file name> lpt1 /b /b for binary These times, Windows 95 had DOS underneath... why in the world do you want to update such a relict anyway? SP-300V won't run with VW6, but SP300I will.

Uninstall the Windows update.

The sequence can't be changed in Versaworks. In designated cut software like Gosign for Summa cutters, you can reorder the cutting sequence and even the direction. If there is a solution to your problem, you need a tool (that I don't know of) for Illustrator to change the sequence, or you need...

If you use original parts, it's no lottery...

Be extremely careful, that the media doesn't lift up from the sensor. (I once drove 350 miles to tell a customer to move the cutter a little farther from the wall in the back...)

Do a sensor test and you will know, what the machine sees. Do you use original parts?

Or you can first try to clean the line sensor.

FB500 is how old by now? 20 years? I was trained on the successor FB550-750 10 years ago... I would also go for aftermarket ink, if at all. There are still some machines in use in our customer base. End of service life is July 1st 2025. For the FB550-750, there has no EOSL been communicated yet.

Try the roland_SignCMYK.ICC (or RGB) profile as a simulation profile in rasterlink. The Roland Profiles are in the programdata directory, which you need to unhide to access.

You can print the opostestv3.pdf (it's in the testfiles directory in HP cutter control) on a desktop printer, then send the pit file to the cutter. If this works, there could be a bug in flexi. Sometimes the offset is wrongly registered. If you do the Opos calibration two or three times, it can...

I set the EPS margin to 0.45mm. It helps, but it's a good idea to use PDF instead of EPS.

You can redo the calibration as often as you want. Besides the 10 digit number, there are also the offset and gain values printed on the label. If these are correct, the "calibration" worked. ISS PCA stands for Ink System Subsystem Printed Circuit Assembly (or something like this...) and...

Have you removed the clear plastic protector, that is over contacts?

It works with all Rolands. With the latest models(VG3, SG3) , you need a number to enter the system switch mode. Call a certified technician...