Search results

I would think something made your original printhead/ main PCB short out. Probably a bad ribbon cable or connection. You can repair the original PCB - contact MacMedia. The original printhead may still be okay. The slider board may or may not be damaged. Trouble is, you won't know what...

Your missing nozzles may come back after a while of using solvent ink. The poor quality is from bad dot placement. You need to do a head slant adjust, then dot position placement adjustment to get it right again. Look in your maintenance menu.

From the Manual: ERROR 16  MRL COMMAND Received data does not follow the command system set in the printer. Send the data related to the class of commands, using an application corresponding to this printer. 1. Make sure that the transmission data is in MRL-III command...

Yeah I thought the same thing when I saw those white tubes. Haven't seen those since my Roland FJ printer circa 1999. I now have a CJV myself and can tell you they are clear.

Make sure you have your system's speakers on next time. I had a similar problem with my CJV30 randomly stopping and I found the reason after hearing my USB disconnect sound (dingdong) which preceded the printer stopping. Turns out my new computer motherboard is susceptible power fluctuations...

I have a CJV30 and can say the page is skewed slightly. It doesn't matter if the print has stretched - it will still find the marks, but if the sheet isn't lined up right for it to find the first rear mark it will go right past without running over it to find it. Sometimes the print skews as...

You should be able to download it or get a copy from Mimaki. As far as I know, the machine is the "dongle" required for activation, so as long as the rip sees your JV33 you're good to go.

If the black nozzles still look like the first pictures, then they're not too bad. Mostly firing but with some deflecting. I'd reckon they will come back if you nurse them a bit. Get some cleaning solution. NOT MEK it evaporates too quick and will destroy most everything. Use it to clean your...

I have a CJV but I cut any small stuff on my Graphtec 7000. It just works so much better. Having said that, a workaround for small stuff is to cut weed borders, take out anything you can then put app paper on. Flip it over, remove the backing paper and weed the vinyl off the app paper. Do...

I put this original question to the gurus on a local tech forum. It seems if I'm going to go with a dedicated graphics card, then I don't need the i4770 CPU which has on board graphics which will go unused. So the recommendation is for Xeon E3 1230 v3 as it's basically the same chip without...

There's a good comparison between different cards using Photoshop actions here: http://www.pugetsystems.com/labs/articles/Adobe-Photoshop-CS6-GPU-Acceleration-161/ Shows a big difference between the Intel HD 4000 and say GTX 650 - for those things that use GPU acceleration...

So far that's no, yes, yes...yes, no, yes. Seems like the ayes have it. Probably worth me trying it without one at first and find out myself if needed... Still undecided and unsure.

At $670 here it's a bit rich. I wondered about Nvidia Quadro cards as they are recommended for graphics work, but I wonder if it's all a bit redundant now compared to the now excellent gaming cards or indeed onboard...

I was thinking of adding a Geforce GTX 750 2GB. I do use 2 monitors and this has 2x dual dvi output. It's $169 here which is okay, but if I don't need that extra power draw and noise then I won't bother if it doesn't speed up anything appreciably.

Hi all, just about to order a new desktop computer - will be doing everything on it except gaming. So, designing in Signlab, some Photoshop, ripping big files... as well as the normal daily stuff. The build will be Intel Core i7 4770, 16GB RAM, 250GB SSD, 2TB HDD. Will the Intel HD 4600...

When you say it will "Only print black" do you mean that nothing else prints at all anymore? Can you upload a picture of the test print... If it's the case that the other colors have dropped out a bit and don't come back after cleaning, it's either the cap top or pump or the tubes in-between...

Interesting to hear this. I suspected this was happening when I had to switch from full solvent to ES3 inks. Once I told the printer the new inkset, then tried to profile it using my old starting point printmode, I couldn't get full saturated colours anymore. Especially reds. I was convinced it...

Yep I'm with you guys on this. The MAPS sounds like a good idea - indeed my CJV30 needs this, as certain colours like blues and greys are prone to banding. However, I'm more wary about what they don't tell you is in the firmware. I'm quite happy knowing I can use generic heads and third party...

Okay just digging up my own old thread as I've linked to it from elsewhere here. It looks like the tutorials link is non existent now, which is a pity as it was the most useful thing I'd encountered from Mimaki. There's a few good Rasterlink tutorials on YouTube though - and if they don't help...

I still don't use Rasterlink, however when I needed to use it for a time I learned how to tweak existing printmodes to get good output. I wrote about it and included some useful links here http://www.signs101.com/forums/showthread.php?66844-Rasterlinkers&highlight=rasterlinkers.