Search results

Wow. She's a beauty. Probably dosent leak ink form the old cork ink fountain seals.

Or Just hit the send button five times. Dont try to find shortcuts.

Slow your cutting speed way down.

The first press I started with was a Goss Community.

Still a little soft, had a cool front come thru, slowed the drying. Mixed a dark peach colored paint to the drywall mud and it is drying lighter. But over all it looks great. Three hours start to finish. Only $60.

I just sold mine too. The new owner is going to Die Cut Clear Face Masks. I got a wopping $150 for a 2000 lb machine.

This post has inspired me to redo a bathroom in a rental property I have. Two walls are smooth and two walls are textured. They will all look alike by Saturday afternoon. Thanks S101

But a Hopper Kit from Harbour Freight. See attached photo. Lightly sand ACM then add a good outdoor white primer to a half or a full bag of concrete. Mix it well. Use dry wall mud for indoor use. Add it to the hopper, stand back and spray the sheet of ACM to your liking. After the mixture starts...

Cutting to deep. Dont use aftermarket blades from Amazon!.

The GTO is a great offset press, you can print almost anything on it (glossy or matte paper/card/envelopes) great registration for 4/0 or 4/4 offset printing. These presses are bullet proof.

They call it Onion Skin. You order double of what you need and double the price.

Im not an expert on this, but it sounds like the set screw has come loose that holds the micro switch in place. Open the box up that controls the tension bar and you will see how it works. Then you can adjust it and tighten everything up.

Cut marks from other white printed vinyl cut jobs (see attached photo, cut into the crop mark so you can align) and place over reflective marks. The cutter reads the inside of the crop mark. I have done this many of times on reflective material and when I dont have enough vinyl to complete the...

General Formulations just reciently released a 5 mill Holographic Vinyl with a 90# liner In a 48" roll. From what ive been told its very pricey and has a three roll minimum.

I love the windmill. Just sold my Kluge for $150 I do alot of door hangers and the windmill is the best.

I'm looking for Neon Pink Ink IP5-452 for my Seiko W64 Printer. My supplier is out and they say it is Back Ordered until mid April. Anyone out there Know where I can find some. Or is there a way I can disconnect or bypass the Neon Pink Print Head so I can keep this printer running. Thank You For...

With Flexi I just sent 30 sets of 5 different colors 150 total in less than 15 seconds. So Tyler322 Free programs are worth what you paid for them no matter what program it is. Nothing.

Buy a new motor now and wait till the noisy one stops.

Only need one blade holder with a 45 degree CB15U blade. I Kiss Cut, Perf Cut and Straight thru cut on 3 mill and 6 mill vinyl laminated or not all day long. What I print one day I cut the next. Machine is bullet proof.

As Canuck said keep it short sheets. I print 81- 3.5 x 5" ovals per sheet at a .30 spacing and fill a 100' roll takes less than 5 minutes to cut each set of 81 at the speed set at 20. Tha faster you cut the more it cuts off towards the end of the sheet because of the back and forth motion. So...