Search results

if you where burned out before by the time you get done reading this thread you will be having a nervous break down

it worked ok on the cinder block mortar line but probably not as deep as on the brick. how soon do you have to do the job? maybe you should get a sample from arlon and do some tests of your on in the area you will have to put the graphic or someplace with a similar structure.

try tape. depending on what paint you used it may not bite in to the acrylic so put tape over it and pull it off. i had to do that with some acrylic i ran through the uv a week ago. printed a line that should not have landed on the acrylic (didn't have it masked off enough) but took some clear...

all vinyl shrinks calendered more than cast.

i have installed arlon PDF8000 on cinder block wall with no problems. not as big as what you are planing and probably not as rough a surface. shouldn't be a problem sticking. i just used a felt squeegee for my install but i would imagine the 3M tools would work better. i would laminate for two...

everything is custom so no set menu on the wall. also we don't really have that type of business. not really any walk by or walk in traffic we are in an industrial complex. maybe for someone in a strip mall it might help business or make it easier.

our XR-640 has the metallic set up and we don't really go through that much ink through cleanings. we only use the metallic ink about 3 times a month, have only ordered 3 metallic cart.s since we got the machine which i think isn't too bad. our xc-54 which is set up for white ink now that i go...

this might be your best bet for big and right in front of your face. here is what works for me i have a steno pad i use and during the day i add to the list. jobs i am working on and if it's a rush i hi-lite it also at the bottom of the page i keep a separate list of materials i need to order...

aside from the fact that they paid $600 for a sketch my 8yr old granddaughter could have made.... the customers never understand what goes in to reproducing logos/designs and they never take in to consideration where this will be used or how many different ways they will be printing it. then...

maybe an upholsterer would know how and can do it for you if you have one in your area

like already said not impressed with the solvent white. we have xc-540 w/ white configuration and it works ok but since we got our LEJ640-uv printer we haven't used the solvent white. basically just runs the cartridges through the cleaning cycles .(actually thinking about changing it back to all...

we would raise the color levels in our artwork. also check you printer setting if you can raise the black level. i believe it was the photo black but we don't use that printer any more. the 4880 we use now with the black max inks has been working great. also it came with accu-rip so you have...

fellers gets beat up a lot hear and i have been guilty of it my self from time to time but lately if i email my rep for pricing on items he is pretty competitive. they are not the best at everything but neither are any other of my suppliers. they all have items that are priced right and some...

i would put strips around the outer edge to help seal it and then about 3 strips in the middle so that would give you five total and the two ends.

avery has some but not sure if they have the color you need but i would say laminate with matte is the way to go like already mentioned. just charge what you have to if the customer goes to someone else they will have the same problem and have to pay for green vinyl with matte lam

our XR went in with no problems but our UV machine came in (new out of the box) with one bad LED and they had it fixed with in a couple of days. haven't really had any other issues. any issues we did have were under warranty. i have to say any roland dealers we have bought machines from have...

IMAGESTAR DPMSPPRE Polypropylene Film Digital Media ImageStar DPM PP film with repositionable adhesive is a tear resistant polypropylene film with a water resistant satin coating. get this from nazdar source 1 used it with full black bleed and had no curling issues. i did...

we print negs out of our epson 4880 w/ accurip. we use them for silk screening. the printer right now has all black ink (black max) we used to use the epson 4800 w/ the 4 c/p inks and it was ok we just had to bump up the black ink. you should be able to do it just have to make sure your blacks...

Thanks for the info guys will keep you posted waiting to get info from customer.

thx