Search results

Cry me a river. This should be a free firmware upgrade just from a security standpoint alone.

I am taking it you are using channel control in Onyx to take over the LC LM channels? Have you looked at using the aftermarket green ink for the Epson GS6000 if you can grab and control the LK channel? I know on the old rolands there is a way to run orange and green instead of lc and lm without...

Yeah now I am curious SlikGRFX lets seem some pics.

Stop using cardboard cores and use plumbing PVC cores. The cardboard cores expand and cause walking. Also replace your pinch wheels on a regular basis before they show wear.

You need to call a tech out before you cause more damage and then really have to call a tech. If you don't charge the dampers properly you will get no ink flow or it will print and fade on each job. Your pump maybe bad or clogged also. It's almost a good thing in regards to electronics you are...

Jump off the cliff and do it. However I will suggest you listen to what some have said here. Figure out where you want your business to be located. Get 2 LLC's established with different phone numbers and different real addresses. Maybe one at your new shop address and the second at a virtual...

https://www.jammer-store.com/gsm-blockers-jammers/ Just make sure you are the only one who has wifi password at the shop and your wifi calling is enabled. Done right you will roll up to the shop and you won't have cell signal but your phone will switch to wifi and operate as it should. Don't...

Get a short distance cell jammer and hide it. I don't care if it's legal. Don't disclose the wifi password and have an office phone for those facebook emergency calls needed. The owner can run their own cell off the wifi when cell signal is not "available". There are a lot of businesses and jobs...

PROFILE PROFILE PROFILE the S60600 and THEN make your judgement. The guys running the Epson printer are not using the correct profile and or settings. Only you and your clients can judge if a printer output fits your needs not anyone here. It's impossible when the printer operator doesn't know...

In reference to personal experience only. Mutoh service sucks especially from signwarehouse. Roland service is dependent on your dealer but generally good for the most part. Mimaki is also fairly dependent on your dealer but they can be a bit choppy on fast resolutions and quick service. We ran...

Tell them to take the machine back and move on. I would stop being a testing agent for them.

Buy Optiscout. You already have the camera so it will be cheaper. Don't buy i-cut.

NOT RELATED TO POST TOPIC Please keep your posts/comments related to what is relevant to the sign, sign, graphics industry

Check out American Rotary ADX20 or larger to run your pumps. Depending on your table pump requirements FPZ Pumps have some good single phase pumps if you don't want to deal with the converter. Just because you get a strong pump doesn't always mean more suction, sometimes it means damage to air...

Years ago I took a 3880 apart and found out the head was solvent resistant including the manifold. The issue you run into with that machine and some of the other epson printers isn't the solvent ink so much as there are so many aftermarket solvent parts available. It is controlling the channels...

Is the orange fading only on non laminated materials or are you seeing this on laminated materials also? The Orange and Red inks on the S80 are not MCS certified from my understanding.

i1iSis 2 Automated Chart Reader for Printing | X-Rite

Hello, We are looking to purchase a USED Summa Flatbed cutter (Prefer F1612) or a USED Zund Flatbed cutter small and large so send us info on what you have. We can work with you on a de-install date if you need to order a new unit in. Thanks!

The mutoh is running old tech. Look at the epson S40600. They are running them around $9k after rebate, better prints. If you buy from signwarehouse make sure you keep all your ink receipts in order for their tech support or they won't even speak to you when your head fails under warranty which...

I would talk to a lawyer who is an expert in business asset management. Why not create several LLC's to segregate functions & risk including having one on the shelf ready to go just in case? You don't want a lawsuit, tax lien, UCC claim or any other dispute to slow or shut you down. You and your...