Search results

Can Anyone ID this please? Thanks SC

I would second the contamination issue yellow and cyan are next to each other (making green). It looks like the cyan has contaminated the yellow line. It is normally the sponge on the capping station poking through the mesh causing it to wick between colours. I would check their is nothing on or...

I am getting a E074 Err CR2 Current every other morning when I come in to my VJ 1604. The machine is put in standby mode every night before I go home and runs faultless during the day. If I turn off the machine and turn back on the error has gone. Should I clean the encoder strip with some...

We have for a very long time used Signlab to design in and then saved as a level3 EPS to print from Wasatch. This has worked well and the colours are exactly right printing from wasatch rather than signlab. The issue if I save a EPS then do some changes and save again both the original design...

We have a company nearby that is churning cheap crap out also. The big problem due to the economic climate and customers being tight is:- They is are gatting awai wid it oll the tiem.! :smile: Seems at the moment the only factor is price. Not quality, Not consistency, Not design or anything...

I presume you have the 75% for this installation? The other 25% is not due till after the work is finished as you stated "25% when complete the job" The real issue doesn't start until the checque for the 25% bounces! Yes their is an issue with the coroplast sign but that is a different issue. I...

Does it power up?!! Has the machine been stored with the cleaning/flush cartridges installed if so their is a small possibility of resurrecting the print head? If not the machine will need to be flushed and the dampers and print head replaced along with the print head cable. I now reckon that...

I think this is an encoder disk error. Take off the cover of the left hand side (looking from front). There is the PF Disk encoder. On top is the encoder sensor. The Encoder disk may be dirty, clean with alcohol. Also with the machine turned off and powered down pull material through the machine...

I have a graphtec jx2100 which runs the hp 2500 ink set. Absolutely useless as a printer due to high ink/printhead costs and specialist materials (water based) which do not work even when laminated. I would walk away from this money pit. The only good thing about the graptecs version is the...

Welcome from the UK to the best sign forum on the planet. SC

I am just going to suggest a warped encoder disk. I realise yours is a 1204 but should be similar to my 1604 which tends to jump every now and again (especially in the warm weather). I have a new disk and a spacer to centre it but have been so busy and it doesn't get to warm in the UK this...

Getting back to the real issue of the thread. I would like to know whether the owner of this font has paid whoever created Helvetica (even though the "R" is ever so slightly different) for the rights to use Helvetica? Also I note this is a French designer, and us English and French do not get on...

Their are firmwares on Mutohs site. But I would advise on asking on this forum for an earlier versions as the later ones have all sorts of issues to stop you using third party inks. SC

How long you storing this for? The machine originally came with a set of flushing/cleaning cartridges If storing for a long time I would install these. Only issue with this is you will probably use a set of flush cartridges and maybe another set of inks to reinstate it again and this is...

S.S.D.D. this happens all the time. Lean out and pick up your dummy up and move on to the job/client that appreciates what they are paying for. If the finished article is YOUR design I think they have breached your copy, especially if your layouts/proofs state they are not be used unless payed...

I am also looking for used print heads for the JV3. SC

Sometimes you can get later versions opening in earlier if you remove some of the fades and special effects which are available on later versions. The only real issue with exporting is you cannot re-edit the text. SC

It sounds like a leak or bad seal on the capping station. Also check all the pipes for leaks. SC

Top one is custom drawn and the bottom one is Stencil Bold. SC

Your pump/maintenance station is blocked. It is possible to clear it but it is a bit hit and miss and a really messy job. Personally if it were me I would buy a complete maintenance station with new pump etc. If you want to try and clear the pump I would fill the capping station with cleaning...