Search results

OVA Thanks for the tip I appreciate it. I will look for those things and keep that in mind. I also have a stud finder that also reads for electric current so that will help as well. With as high up as this is going on the building it will probably be above the ceiling in the building and in...

Thanks guys those are the kinda of things I am looking for. Probably more like what Phototec's link shows as I don't have to worry about removing or cutting any siding. I appreciate all of the help guys.

Thanks for all of the info so far. I guess My concern is with the siding being not flat that the bracket wouldn't get good enough support.

Hey everyone. I have a customer that wants to use a scroll Bracket to hang a sign on their business. The only problem is that the building has vinyl siding on it. I am not sure how to approach the install of a bracket like this on that type of material. I know how to install it if it were on...

What about just using XPEL paint protection film on it that you could replace when it gets tagged.

I have personally spoke with Mike several times on the phone for custom quotes and signs. They are wonderful people to deal with. Welcome aboard!

Hey everyone. I have a request from a customer. They have a layout of their facility that they would like to blow up and print on some paper. They would also like to be able to write on it to show changes and other things they are doing in the plant. I have some old Roland paper here. I...

Hey everyone. I hope you all had a good weekend. I have a question / possible problem. I am new to the dye sublimation process and we are trying to get our first order of 40 coozies completed which have to ship out today in order to make it to the customer on time. We are running a GX 7000...

What I would suggest is to possibly get rid of the ladder flip her around, put her on the ground and make it look like she is painting the company name pink. Like put the roller in the "R" of Room. That way it really ties the graphic into the name. Just a suggestion.

Yes you can cut Photo Tex. One thing I noticed while doing sample tests with it is if you can do rounded corners as much as possible on your cut path it works best. I couldn't get it to cut all the way on hard point corners. It would leave a strand or two still not cut. Hope this helps.

Sticky Signs, I recently made a purchase of heat press equipment (by recently I mean finished the paper work on this past wednesday) I spent a lot of time looking at different models. I looked hard at the Geo knight DC16 as I had a chance to pick up a good used one. I also thought at...

Here is what I would suggest first. try this out at like a 36" or 48" core size. That way if it doesn't work then you will not be screwed with holes at your 30 and 54" areas that you can't use and end up give you problems.

Mainframe it appears you and I were on the same wave length here. You just got it out sooner.

Ok so to be upfront I don't have a take up system at all but thought I would try and lend some advice on a possible solution I see for this problem for everyone. First off it appears that the screw in that bracket just tightens against the tube it rides / sits on. Is this correct? If so what...

Are you running Flexi to print by any chance? If So I had a similar problem and it ended up being a setting in Flexi. Check your Panel Margin setting in the advance tab. I had mine set to .1 and at the end of a six foot run it would almost extended my print by 0.25". One way you can check...

If I were to do a job of an 8' x 16' sign I would never mount them via a laminator. First of all I would print all panels at least with a half inch over lap on all sides to start. I would find a place big enough to at least be able to lay two panels(preferably an area where you can layout all...

Does anyone know where I can purchase the template for rally stripes on a 1979 Z28. I would appreciate it. Any help would be greatly appreciated. Thanks in advance. Big Z

Here is what I suggest. I wouldn't even start printing the job until I had full payment in hand. That is the only way you are going to guarantee not getting screwed in some way. Just my 2 cents

Yeah I tried them already. They have something I could use but they have a $50 minimum and I only need to order a total of $20-30 worth of stuff. Anyone else know of any other suppliers?

Anyone have a good source for POP Hanging systems and supplies like the ones you can get at Hangups? I called them a little while ago and they don't have what I need. Any help or suggestions would be greatly appreciated. Big Z