Search results

bad chip on the cartridge.

Do a search here and see what people have said about them. We had a GFP laminator where I used to work and it was NICE. We have a Seal & Chinese oldie here and they suck big time.

I would also try replacing a few other components, sounds like something else is also going out. Hopefully you have another old computer around and a competent repair guy to help you out. We run our Gerber Edges here off of Win7, but we are running Omega 4+ so we can use USB-to-parallel cables...

I purchased the similar deal a couple months ago, was well worth it to get the fonts. Not sure that I will ever use much of the artwork for commercial work, but I did knock out a personal project for the owner's family using some of it in just a few minutes. These deals are actually ran through...

"Jumbo wide retractors" have two poles. https://www.creativebanner.com/ProductPage.asp?id=&stype=sub&cat=Retractors&sub=Jumbo+Wide+Retractor

At the first sign company I worked for we only had a Roland Sp540v for print/cut. If we were laminating in-house it was spray lam (frog juice), but that only works for "flat" decals; not wraps. When we needed something laminated (like a wrap) we found a couple local wholesalers who would...

Every Adobe program (and almost every other software company) has always been like this. it is done to encourage everyone to upgrade once the upgrade comes out, and a lot of the time there are specific features in the newer program that the older program cannot understand, therefore making you...

When I get a file like this, I create a new file in Illustrator and place that file into it. Then you can embed the image and remove the crop box. Usually works great!

You don't know what they might call that typestyle do you? The customer keeps insisting that we did their old trucks, but I cannot find them in the archives as the files are not named well from back then. I was able to find one piece of artwork that was created with their typestyle but it was...

That is pretty close, but still not there either.

It might be a dumb question, but which part of that kit are you waiting on specifically?

If you have a Gerber plotter there is LexEdge which can be cut and reused many times w/o adhesive.

It is kind of similar to Concave Tuscan, but a little wider and not as bold. I can't find anything closer and Identifont finds no similar fonts...

I wish I could, their original image is 480x640!

anyone?

Craigslist usually has one listed, ebay also has them available but for more money. Just do a search on Gerber Edge and see what comes up, then send the seller an email and see if they can work something out with you.

I am thinking this is not a regular font, but a manufacturer-specific font, am I correct? (I am hoping I am wrong!)

The Plotter Doctor might be able to help you? Does it share the same clutch with the next generation Edge printers?

it makes a cool website intro also: http://www.lovelandcastle.com/

To conform to NFPA standards the standard engineer (highway) grade of reflective is NOT enough. You will need either Reflexite striping or Diamond grade. Diamond grade is pretty hard to install as everything has to be pre-cut with a super sharp blade and you go through a LOT of blades. Although...