Search results

I have a costumer that want me to print a design on 3M Fasara products (he insisted for the brand). I normally this. I'm use oracal or mactac products for trying to find if the material is compatible with my L26500 and found nothing on the web. Does anyone have tried it yet? Thanks.

and what do you use to clean the edge?

Is it possible? I don't have a dibond sheet in my hand to try it. http://youtu.be/XcjjoOXHISs

Yes, I'm testing it on the exact same wall. I only have a 30in sample roll of the mural stuff and I did not want the customer to have a too large piece in his conference room. I also put some in my office. I've tried this material (24inX36in) with a 10mil canvas look laminate and the print and...

I have a material that is designed for murals. It's a product similar to phototex but it's flat like a vinyl and it 7mil thick. My customer want it laminated for protection and my laminate is 1mil only (non pvc). I've made some sample 12inX18in and it hold very well compare to phototex +...

Ok and if I know that this material ALONE is good in 48inX120in (even more). The laminate is 80% thinner than the material itself.

I'm testing a new vinyl for murals and laminate. My test is more about adhesion, edge curling part. If I do a 12inX18in test and everything look good after let say 5 days, can I assume that a larger piece like 48inX120in will behalf the same thing at the same 5 days on the same wall? thanks...

I'm looking for a machine to make round corner on a variety of stock. It goes from paper, dibond, aluminum and coroplast. I've made a search on the forum and the accutter seems to be a solution. I would like to be able to cut 3mm and 6mm dibond and 0.63 aluminum. What woul you suggest me...

Good, I'll try this. Is it mentioning if it a regular cleaning or the hard one?

Here is the picture at 8pass printed on vinyl. The camera don't show it up verry well. There is more banding at the startup of the print than the end of it (12inX12in square). Oh, and the test prints (test plot) are perfect.

I had the same problem. When you print, check if you see alot of yellow ''sprinkle'' when printing. If you see that, change the 2 black/yellow printhead. I even had a brand new head not firering up properly even if the test plot was very good. Back to my problem, I did correct my banding...

thanks for the info. I had this problem before but couldn't have an explication for it.

I've swapped k/y and m/lm with the spare i kept and i did not saw the differences. I've made a total of 4 change to swap each head of each color.

ok, so how do you explain I never had any problem printing in 6pass and 8pass before? At 10-12pass, the printer is very slow.

last news: I was doing a head cleaning and at the end, the printer pop me a problem and asking me to shut down the printer. When rebooted, I'm made some test and alignment manually and the problem seem to be solved at 90%. If I take a picture, we can not see the banding. I normaly print all my...

To answer the questions so far: No I don't print gutter. I'm not sure why you ask this question. Can you elaborate? the black and magenta printheads are brand new (the black/yellow and magenta/light magenta have less than 60ml and the cyan/light cyan have less than 500ml). The test plot are...

Here is my problem, I've printed 4 12inX12in squares (CMYK) and I have banding in my black square and a little bit in my magenta square. The blue and yellow are fine. All black/yellow and magenta/light magenta printhead are brand new and the cyan as less than 1000ml of use. I've tried head...

Pat: I have the converd product you've talked. It's a good option, but the outdoor durability is alot less than coroplast. But it still my no1 choice for now. Gino: by non-pvc vinyl I mean a white printable product with sticky backing that could be use as vinyl at approximately the same cost...

I'm looking to replace coroplast with something that do not have pvc in it. So what is the cheapest non-pvc board around 3mm or 4mm that could replace coroplast? Also, other than the new 3m 480 vinyl. Is there a basic vinyl that have no pvc in it that can be printable? Thanks Ben

ouf! It's out of my league. If only my latex printer would print on fabric like dye sublimation...