Search results

although its called updater i think its the full prog. sorry if not same site you will find some profiles http://download.rolanddg.jp/en/color.html#sc540

on my fc7000 you can turn on perfcut in the plotter menu by assigning a condition and cut type. work flow would be. find marks send normal cut file with go to home after cut select condition send separate perfcut path .

other possibility are you sure the media is staying flat and not buckling slightly its a wide plotter would need more than 2 rollers

also have a look at menu cutter config calibration should be 0

i have a sc 540 that will not change to versaworks with out major mucking about, so won't bother. wasatch do a single printer upgrade from colour rip for not a lot of money far less than a full program. but i am still happy running colourrip it just works fine. i use VW on the VS and basically...

have a look in the profile as well for feed calibrations as well as the machine. how large an area are you printing and cutting in one go. the more pinch rollers you can use the better bit tricky if doing print and cut immediately. i normally only do a area about 1200mm sq as that fits my...

i have a VS540 and both your problems i think are to do with the feed calibration, set it to 0. alliteratively print with reg marks and send the cut after if that works back to first point

need to use a vector based prog to use cut and spot colours, think its turn form feed off to return to origin

just been looking my self it came up about the 4 item in a search. don't think i can post a link here. ??

sure that means a cart is missing even thou you say it is not. but it may be asking for a colour your not expecting so best test with a small cyan only file

my fc7000 intermittently failed to find the rollers after checking and cleaning the sensors changed the big main long ribbon cable and all was well.

as you said it had some overspray i thought static. then you say it is poor print for 21" then ok would make the main ribbon cables suspect.

%^&* cold here (Hi Dave). got caught out printing on to material not kept in the print room, had to pre feed it over the heaters a few times then printed band free

there are 2 adjustments normal print and cut adjustment in the user menu cut to alignment marks is in the service menu. on most roland machines. woolly

post no 12 is on the money for me. as a by the way look at the outer 2 3 turns of the vinyl on the roll and see if they are 1 - 2mm wider than the rest of the roll. woolly

this is what i fly

as a cutter it was one of the best i have its larger brother and as a printer rubbish but still use it every day as a cutter must be 8-9 years old now, and still cuts as well as a new one, (i have a FC7000-130 as well ). just look after it woolly

or possibly move the head with the keys to the area where the problem starts press base point and do a test print. and compare with a test print done in the normal place. are the wipers in good condition. static can cause similar. woolly

never tried water slide but you can use a cast clear or white and use the cutting to cut to shape. really is the best tool for the job and if your art work is up to it i don't think you will make better. if using any clear over spray then only use the resin ribbons. woolly

do this from printers and faxs so changes are saved for future use. in printer properties printing preferences advanced user size properties add new material size will be called newform0 in corel double click the page border and set page from printer. woolly