Search results

I started on V5 and have never been able to... would be handy tho.

Thank you gentlemen. I checked my Johnson catalog but they also have a JRS catalog and there were 3/4 x 10 extrusions in that that look correct. Gene :notworthy:

A (good) customer sent me this pict- looks like someone stacked 3/4 x 6 holders but I can't find those either. Anyone have a source they can share? Thanks Gene

On my VP540- which looks the same- there are 2 spring leaves (#40 on the diagram) which hold the carriage so that it can slide from the low to the high position that needed to be re-tensioned (bent) as they were allowing the print head carriage to tilt forward.

For one thing- it costs me half as much to have a recycling container dumped vs. a normal dumpster. And while I don't expect my recycling to make any amount of difference to my life... it certainly is not a bad thing (I have a child and a grandchild to whom it may make a difference). Bob is...

Years ago I did boat registration numbers for an old duffer (he was probably younger than I am now :covereyes: ) and he insisted that the reg had to read from the bow. I could not change his mind so that is the way we made them. Always wondered what the DNR officer that stopped him said about...

I would be interested in the media rollers in the back if they are over 54". If you want to part with them PM me please. Gene

This machine is 15 years old and has about 5 hours of heat time on it. It seems to correspond roughly to the current DK16 model (http://www.heatpress.com/product.php?pn=9). I am looking for $300. It is heavy and would be a pain to ship so prefer local pickup. I will throw in the thermal...

thanks- I have a post on there and CNCzone as well- nothing yet. I just noticed my Kevin McCarthy moment in the original post... 'cannot find almost nothing' AAARGH

I am importing a Chicom laser and it is spec-ed out with LaserCut 6.1... but I cannot find almost nothing about 6.1 and it seems to have a different control board from 5.3- so not backward compatible. Anyone with knowledge to share? Thanks Gene

Will stick to almost anything but expect shrinkage. Specs are interesting- never looked before- 3.5 mil premium vinyl http://www.arlon.com/utilities-product-ProductListing?PrId=49&SelVal=2&SelLevel=0

Thank you Gentlemen. Gene

WTF sez caslon antique but that has a distressed outline- is there a font with a smooth outline? Thanks Gene

First thing is replace the captops with that much use- I would order an encoder strip for when that fails as well.

That dear sir is otherworldly kehl. I wish I was younger [and had ambition of course]. Gene :notworthy:

Good thoughts from Rick. I once heard 'Never pass up an opportunity to keep your mouth shut' - it has served me well.

Used or new? Gene

This about 3 yrs old- works well. It takes 54" material but will cut 49.5". We now have a 64" printer... so... if we could sell this we would buy a GX640. Gene

For a plotter we use Bren Inc material- works good and reusable but you have to use stencil font in the real world.

Not sure if it is on my end or not. Vectric forum was unavailable for a day or so too. Thanks Gene