Search results

You need the upgrade kit. There is no possibility to mount the pumps without the upgrade kit. It's more than just one bracket, the pump motor positions will change, the ink tubes will be connected differently, and much more.

Perhaps you have seen cutted graphics out of coloured vinyl.

It is more than the ink needed for doing really eco-solvent-printing. Eco-Solvent-Printers needs heaters to warm up the media and so on.

The SP300i don't print with spot colors as the DC4 does. Setting up Spot Colors in the graphic software and map them in VersaWorks is not the same as print with a ribbon of that color itself. "Spickels" arise on every media as soon as colours are mixed with other than 100/100-relations. The...

The information of SAi was that the dongle-based Cloud-Version will have this kind of floating licence, but not the undongled version.

Thats strange. Specially because a moving OPOS (!)-Sensor will have influence in the cutting accuracy. No further idea at this point.

Perhaps the plotter don't like that it's OPOS-System is named Opus, and because of this the plotter sometimes strikes ;) . Just kidding ... I had sometimes (I'm a technician doing Summa repairs) that the OPOS-Sensor snaps out of his position (it is just snapped in his holder), for example when...

1 inch more media width Improved Take-Up-Roller Little difference in ink black design Discontinued doesn't mean that there is no support anymore ... it just mean that a new model have released.

When I move Flexi to a new computer, I will save my color management settings with presets out of the production manager. If you still have the old one, this could be a solution. Of course switching off color management is a solution. But who knows what colour management does, who knows what a...

Try a new knife. And, depending on the thickness of your media, try to use a 45°- or 60°-knife.

FlexCut will cut every vector you define, but there is a limit that floats depending of complexity, size of the contours and stability of the backing. But if you don't want to flexcut to detailed (for example branches of a 5cm tree ;) ), you will not run into problems.

The only PhotoPRINT (SE) not available with tiling can be upgraded with the tiling feature. I don't know the tiling dialog in Illustrator, but with the PhotoPRINT-Tiling option an overlap can be set or tiling marks.

FlexCut on Summa works fine. For Beginners, it takes little time to get used to fine tune the parameters, but with a little experience it works well and fast. I don't like Graphtec so much. And, when the focus is on contour cutting, the best choice will be Summa S-Class, for FlexCut preferably...

Forgotten to say: When cutting sheets on a roll plotter, you will lose the last one or two inches of a sheet because of the tracking. The plotter can't feed the sheet to the very end because it needs to be tracked by the rollers.

You're welcome. Yes, it will work for you. And specially the Summa, because OPOS have a special feature for cutting sheets: the sheet mode. If you want to cut multiple copies of the same artwork on sheets, you just need to set the plotter in sheet mode and send the contour job one time ...

It isn't difficult. S2 works fine with FlexiCloud, but do not support every single feature. For example, since FlexiCloud, in addition to OPOS X, OPOS XY is supported too (scanning of an additional line to compensate bowing/smiley-effects during contour cutting), but not OPOS Barcode until...

There should be a way to let SAi reset the licence.

The first generation OPOS could run into trouble with Marks printed with a Mimaki. The second generation OPOS X should work wirhout problems.

I'm nearly shure that it is impossible to import 540i-Profiles to a 540V-Setup in Versaworks.

The comparison of passes between the 9000 and the 26500 is totally senseless because the print- and ink technology, the number of nozzles, the mechanical resolution and much more is different. "Looks like crap" is nothing I can imagine, so I can't give hints. Are there problems with colors...