Search results

any labels can be removed if they really want to get it off but there are materials for security purposes either destructible vinyl which breaks apart when peeled and very dificult to remove it all or the void material which leaves the void on the item when the label is removed been making...

I Have Use The Oracal 751 And 651 Both Have Worked Fine But They Do Make Vinyls With Optically Clear Adhesive For Indoor Window Decals

i think if they want your future business they should either honor the price or give you the some stock of equal value to make up for their mistake i don't believe these guys make a ton on the sale of the machines but more so on the material and consumibles the sell you after

very good point and don't rush go slow and smooth but also try not to stop in the middle and be carefull at the end sometimes the tail end can wrinkle or fold over as it comes off the roller i usually get my finger nail on it to hold it to the roller as it finishes

i would say i probably wait about a half hour approx.

we do this all the time and about 98% ok we use a hinge to get it started and then pull the release liner as it goes through the laminator i am sure there are some threads of this some where on this site

4 pc's for our graphic and digital department 14 for the whole company and 1 pc and 1 mac at our other location

since you changed your avatar can we send self addressed envelopes w/ postage to get 8x10 glossy

my grandma what a big rocket you have welcome and good luck same as everyone else if you are going to continue on your own go gerber edge i wish i could print white also

are you using craft paperi have found with out the craft works better as long as you don't have more than about an inch over hang of lam also i will put some scrap material through first and once that is smooth i leave a little flap out (2-3 inches) and put the print under that to start and it...

never had that but it does sound like a sensor problem like the guys above suggested problem is it in the cartridges or the machine what does the printer status indicate for the ink levels when this happens

welcome and good luck with $11,000 i would look into a left over versa camm this way you can print and cut left over not used, possibly a demo ask a lot of questions and read the threads on this site very helpful

sorry forgot a step you must change the swatch from process to spot color in the area where you are changing the name to CutContour

oh yea i bet the info is in the user's manual also

make your cut line then select it and goto your swatch box then select make new swatch dbl click and you will get swatch options box rename the swatch: CutContour both c's must be capital and you can adjust the color if you want and that's it you might have to do this each time you do a job...

sometimes the sign programs come with some we have sign engine and it has a bunch in 11 months only used 1

i just did a 28ft on my roalnd and the only problem was our computer consultant knocking the machine off on the last 2 ft (had a thread about that one)other than that well perfect

about 8 months ago we where cleaning and we threw away our mac LC (only about 13 years old) but we still have our power mac 7200 just to get old files off from time to time

did a job like this once i had to cover a billboard with new business info had fellers make a custom banner to cover it and the put grommets on the sides so you can lace it up like a sneaker the banner covers both side goes right over the top you will need a lift of some kind to get it over...

welcome normally i use oracal or 3M but one of my local venders only stocks avery so i have been using a few avery products (A6,A9 and some reflective) and knock wood no problems yet