Search results

Are you using your media clamps? Are you using a quality media? Are your pinch rollers in good / clean condition? Some cheap media shrinks on the roll exposing adhesive which can end up all over the pinch rollers and this will cause all kinds of media skewing & buckling, this happened on my...

Or simply use an air egress media. If you must use a non air egress vinyl then use rapid tac for application, flood coat both substrate and vinyl then squeegee appropriately.

I encountered this bubble situation on polycarbonate only one time. Had two 8'x8' panels to do, both panels were cut from the same roll stock. Applied transluscent cut vinyl to first panel (dry app) and sat panel on back of truck face up in sun, finished second panel and laid it on top of the...

Solventinkjet.com :thumb::thumb::thumb:

Anyone recognize this font? I tried WTF but no match on the f

Solventinkjet.com :thumb: My SP-300V has worked flawlessly since I replaced my K/C print head. They will send you detailed instructions to complete the job.

Thanks for the offers folks, placing worked fine.

Wow!, how come I didn't know that? That would have saved me from a lot of struggles in the past. Thank you so much.

I have Adobe Illustrator CS2 and customer supplied .eps artwork is in a newer version, would anyone be willing re resave a file as CS2 for me? Pretty please?

Roland ColorChoice was the supplied RIP software for that machine. You can print directly from Corel Draw or Adobe Illustrator using the Windows Driver. Driver can be downloaded from Rolands Site (support section). Windows XP is the latest driver available, nothing available for newer operating...

It boggles the mind that the younger folks of today for some unknown reason forget that they have all the information they could ever want right at their fingertips, it's called the "Internet" you lazy little chits. Anyone else remember actually using a phone book.

Craftsman option .... Graphtec CE Series Your real surprise will come when you start pricing quality materials such as quality cast vinyls & transfer tape. (What do you mean it's $428 dollars for a roll of 3M cast vinyl ????????? :omg:). Just maybe you didn't get ripped off after all. Don't...

* Roland ... Good * Graphtec ... Better * Summa ... Even Better * * * * * * * * * * * US Cutter ... Cheap (have fun)

3165RA = Calendered Vinyl 210 Lam = Calendered Vinyl Calendered Vinyl on Vehicles / Trailers = Failure

Do you also think it's OK to dump your used motor oil and anti-freeze down the storm drain? Happy swimming.

Everyone recommends Hiker or Stimpson brands but I've been using a Fasnap Gromet Press for the last 18 years without any problems. The Hiker and Stimpson gromets appear to be a bit cheaper than the Fasnap gromets, something to consider. Also I mounted mine to a piece of MDO to provide a much...

Can anyone ID the font used for this phone number?

Fixed head cannot be lowered, try reducing static. Are you sure static is the culprit? Are you experiencing overspray with all colors?

Approximately (these measurements taken from SP-300V) with media rack 26" = 66 cm without media rack 19.75" = 50 cm

Which Orajet vinyl are you using? With the 3640 I once experienced the adhesive would ooze from the edges due to it shrinking on the roll, with the pinch rollers set to the edge of the vinyl the adhesive built up on the rollers and the media clamps creating all kinds of skewing and tunneling of...