Search results

http://www.cleancutblade.com/ +1

I set up at 22.5" for the crop marks. This gives the machine a little room if the print goes askew some to still be able to find the crop marks.

silicone

Is that a single wide with a porch & underpining? I needa get me some signage there...

I have the 38" version. I'm not sure if yours uses 2 heads or 4. Either way you may be able to recover the Heads with soaking them. There are several threads here that discuss this. Is the machine in use or being stored? Ask to see a nozzle check if it is printing somewhat. Any software come...

I am setting up a biz card file in Illy to send to GotPrint. Customer wants a Light Parchment/Ivory background. They print on white stock, so I need to assign the CMYK values for the background. Just wanted to see if anyone has done this and could share. I have it set up to what looks good on...

I would suggest getting some decent Calendar Solvent Printable vinyl along with some 13oz Banner material. Then go out and sell some Signs. Really, for the time spent experimenting on materials you have on hand you could sell one banner and pay for some good quality materials that you are...

fill capping station with cleaning fluid(both black & color), park heads over night. Next day use syringe to pull from waste lines while heads are parked. Listen for air escaping(could be signs of time to replace capping station). Run several back to back cleaning cycles(3). Run a test print.

Did you pull thru dampers or thru the heads as well? Pull from waste lines while heads are parked on capping station.

I would start by changing the yellow damper.

x1.5

FYI, depending on the length of the run I would suggest putting a bleed on the print. also, if manufacturing small complex shaped decals keep the run length to a minimum to help with cut registration. Trust me, even with "restrict media movement" clicked over a long run the cuts will start to vary.

Are the lines clear from the Capping Station to the Waste Bottle? Are both lines(Black & CMY)equally hard to pull from waste lines? I would try pulling each individual Damper to get ink to the head, then pull from waste lines to prime head if necessary. low Ink Carts could also cause a lot of...

I think they are the same machine(along with the PrismJetExtra, which is what I have).

from signwarehouse website... Assigning an IP address to the Intercon SEH Print Server Here are some things to check before you go any further. Make sure that all firewalls and virus scans are off before proceeding. If you do not know how to do that consult your manuals for...

tape it down to some coro or poly metal, so it doesn't blow away when the wind gets it.

Place flat in direct sun after laminating. Couple of hours and its all good.

I think Mutoh has a "test" software download that will send directly to the printer(well they do for my falcon), that bypasses RIP software. Might want to look into that. to see if you can narrow it down.

just throwing this out there...firewall or virus software settings ? Did you have to reinstall or was the drive a secondary?

nice install. you could always give them the option of having you come out and paint the face the same "blue" as the other monument, if they feel contrast is lacking. still, great job!