Search results

Raster .pdf, depending on output needs should be set up prior to saving as .pdf. Example: Signs, Banners, 150 dpi at final size. High end products: Brochures, Post cards, Menus, etc. 300 dpi at final size. Work with raster file in Corel Photo Paint or Adobe Photo Shop. Export as .tiff, then...

Possible bad Ink Cart? If air still in the line, its coming from one end or the other. Swap Black Cart. Get to where you can see line coming out from Cart(might have to do some minor disassembly of printer), run cleaning cycle, watch to see if air is getting in there.

Not sure on yours but mine prints the solid colors in 1 pass then moves forward for the angled colored bars. So, the nozzle check would still look good, but there would be extra room between each pass if Step was off.

Step advance issue?

Bad O-Ring in the damper you changed, allowing air to back up into line? Cracked line where it meets the Brass fittings?

Stouse

Regular Squeege.

On that size I would "hinge" 1/3 using a "Big Squeegee", then turn around and do the other 2/3. Dry.

When traveling for a few days I will pull the dampers, fill the capping station with cleaning solution, park the heads. If I don't pull the dampers they will suck up the cleaning solution and contaminate the color in each damper.

Never tried VHB wet. Limit your caffeine intake, it will help keep your hands steady. Not that tough as long as the pattern is good.

Left over backing paper, pen plot on Graphtec. call it a day.

$1100 & decide soon, as I aint got all day. get it in, get it on, get out. Go!

Ask them to send you a sample if you have time. I have been pleased with their products for 10-15 years.

Stouse +1 , roll labels

Outside sales people should price higher 110%-120% of normal shop price. They are providing more service vs. the customers that walk in, email, fax, etc.

Thanks Finishline. Was hoping there might be a sub I could send this out to. Maybe I could sell them on some printed Vinyl...well, with this you wont need any scotch tape... yeah, thats the ticket! :thumb:

bump.

I have a customer inquiring about putting their Logo on Gift Wrap Paper. Has anyone had this come up before? Any suggestions? Thanks in advance.

The latex paint is the problem. Oil based, even though it stinks to hi heck & takes days to cure, is proally a better choice. Is the humidity high in the area. Maybe try a dehumidifier for a few days-week to remove some moisture. Just my .02...

Maybe company A would not start 150K job without 50% deposit, no matter how large the Client is(net 60). Not sayin thats the case. Atleast they did not disclose prices to make you "lowball". Company A should have been compensated prior to submitting rendering, if not thats not your problem. No...