Search results

+1 stencil & spray bomb.

Did you try pulling from the waste line while holding the carriage in the "Home" position on the capping station?

http://stouse.com/Products/SignPosters/SecuritySignStakes.html

nice!

I generally drill & rivet the track to the blank.

Crazy stuff! I am having the same issue with my FOJR. I have cleaned the encoder strip, but still no change. I have had to compensate by printing a 3" band to the right of all prints. It does not mater where I start the print on the media I get a 2"-3" funkyness with every print/media just like...

thanks Coloradosigns!

I am trying to find a frame that I can attach to a wall similar to the attached image. the top, bottom & sided fold open to allow you to insert a Print or thin Sign. Looking in the 22"x28" size range. Thanks

C-bond Install earlier. Printing a Banner now...

I can't remember where I used to get the Magnetic Ceiling 060 Polystyrene Sign Holders. Anyone have a source for these? Thanks

also check your K line coming from the carts, possibly a cracked line.

are you "checking" the link at the left? and then flatten transparancy, check top 4 boxes, hit ok.

You might want to pull the cover & check the line in question for a crack, letting in air. Mine had 2 cracked lines when the carriage traveled all the way to the left they bent at the crack & allowed air in the lines. Might not be your issue, but could be.

:thumb:

You can look here: www.ffr-dsi.com

thanks for the pic!

Can you please post a pic of the "thin metal bar"

Is it just this material? How wide is the material? I have to trim about 1" off the left side of the material if using 38". I use scissors and run about 7" diagonal back toward the edge of the material. Once the sensor recognizes the width all is good.

you will need to roll out the vinyl. hard to pull off a 30x50 roll. See if you can slow the cutter down as that is a long cut. I would also check in your settings to maximize cutting order(not as many back & forth motions). Lastly, cross your fingers & hope your tracking doesn't go astray.

http://stouse.com/Products/SignPosters/SecuritySignStakes.html