• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. VACCUM PROBLEM WITH OCE/CANON ARIZONA 2300 XTF HIGH FLOW VACUUM

    Can't you just mask off the rest of the bed? You would have to do that on a non HFV option too. My understanding is that the HFV version is designed for hard to suck down materials, like warped wood or warped cardboard
  2. Vacuum Océ Arizona 360XT stays on.

    Pedal could be bad? What happens when you click the vacuum button in the software?
  3. Vanguard Flatbed

    Was wondering from people that have a Vanguard flatbed how fast you can do a sheet of acrylic backed with white ink? I would imagine you have to run the white on higher passes
  4. OCE Arizona 365 GT recommended material cleaners?

    What ink set are you using? When I ran one of those printers we had KI and had the same issues. No matter what I did you would always see streaks/fingerprints. We changed over to KA ink and the adhesion was a lot better and it covered all fingerprints and streaking
  5. What is low, medium and high use on an Arizona?

    We have a Acuity F (6170) that has 1.1 million sq ft in 4 years. Not sure if that's considered high but we also had an Inca S40 so most big production jobs that didn't need white ink went on there.
  6. Is Vanguard a good printer? Which model is recommended?

    The Digitech Trufire is similar. Believe they use the same or similar heads. We got one a couple months ago and haven't been a fan. A lot of issues for a new printer. Always heard good things about the Vanguard on here though.
  7. Arizona printhead bad??

    Have ran Acuity's for 8 years and have found it's not uncommon for heads to do this randomly. It's really frustrating especially at $5,000 a head
  8. Question Acuity F WI Ink

    Was wondering if anyone else running WI ink in an Acuity F flatbed has problems getting laminate or masking to stick to the ink? It just peels right off for us. Even 3m tape won't stick to it
  9. Question MiragePrintheads

    Wondering if anyone has used http://www.mirageprinthead.com/ for printer parts? I've heard to avoid Indonesian websites but this one is from Malaysia?
  10. Discussion ZE 680 vs AP3155

    The ZE680 smells terrible as well. I really don't ever use adhesion promoters because my inks stick pretty good to acrylic as is. If it was easy to apply, it wouldn't hurt to get more adhesion. I was wondering if I could mix it with 99% iso since I already clean all my sheets with isopropyl...
  11. Discussion ZE 680 vs AP3155

    Was wondering if anyone has tried both products. I have used ZE680 a lot for improving adhesion on acrylic and have never been a fan of it because it leaves a film that is sometimes noticeable in the prints. I wanted to try AP3155 but don't want to waste $100 if it has similar characteristics...
  12. CentraPrinthead

    After posting this I found another website that was even cheaper than CentraPrinthead, but it was also from Indonesia. I knew the price was too good to be true. At least I can save a couple hundred dollars from DigiPrint
  13. CentraPrinthead

    Has anyone used CENTRAPRINTHEAD - Your Printhead Solution for printheads? They're cheaper than DigiPrint-Supplies for a print head I might buy. Can't find much information on them.
  14. Possible pump issue

    It could be the level sensor has gone bad. The sensor is probably stuck thinking that it's low. It's a pretty cheap part and easy to replace.
  15. DIY replacing head on arizona 250gt

    Anytime I had a tech out replacing a head on our old 360, they would only adjust the screw connected to the printhead for the front to back adjustments. They always said they only do the left to right if you're noticing banding.
  16. OCE 660XT - Mickey Mouse the belt :-)

    How did you connect the two ends together? Just curious.
  17. Question Paper material for covering bed of new flatbed printer?

    Oce sells a roll of it: https://csa.canon.com/online/wcm/connect/csa/5c360769-02cc-4030-aa4f-70b7bd2bbc0f/17+lb.+Bond+Paper+-+VACUBOND.pdf?MOD=AJPERES
  18. New Printer

    I don't know about Oce, since they use Onyx. But in ColorGate you can do a "quality" white. I think it prints faster than "quality layered"
  19. UV Printing on Mylar - Adhesion Promoters or Corona Treatment

    Don't know much about the Mimaki's but there might be a different ink set with better adhesion on that material.
  20. Rip software for fuji acuity x2

    I've used ColorGate 7, 8 and now use 9 everyday. I've also done profiles.
Top