Search results

Last week I was getting "set cartridge" and I want to thank "VanderJ" and "Mike Pro" for their suggestions. Now my JV3 is working but not printing. When trying a test print the head moves like it should but nothing comes out. I am waiting for the tech but in the meantime can anyone give me...

Yes I have brand new ink cartridges in the machine. It was suggested that the machine was not coming back up due to an expired chip so I replaced them.

Hello, After trying a head wash and thinking I did what the manual old me to do, I am now stuck with a "set cartridge" error message that cannot be resolved. I have tried powering down as one thread suggested but same thing. I am waiting for the tech to respond but in the meantime I am asking...

Have you tried looking the codes up on Google? You could call Mimaki and just ask them?

error code Hey thanks guys, you are all correct! IT was so easy to fix but my big fingers are too big so I had to get some tweezers and reseat the sensor. Thank you to those who replied!

Ok now Im getting a "error code 50 media sense" on my Mimaki JV3-160. Ive consulted the manual and tried repositioning the media nine ways to sunday but no go. Does anyone out there have a solution or explanation? Thank you for any help!

Thanks for all the help. It turned out to be the piece attached to the roller.

Mimaki lever Thank you all for the suggestions, I will try them and report back.

Ok the lever that raises and lowers the rollers on our JV3-160 is stuck in the open position. The last few days its been a little sticky but didnt think much of it as it is the older of two machines and seen more usage. Today as I pushed it it suddenly tightened up and would not go in any...

Not booting I had the battery go out on our CJV30-160 and it wasnt even that old. Took off the back panel and replaced and was good to go. I just wanted to throw that out there as it may or may not be of any help but who knows in the future?

Caldera We have Caldera for our giant HP and I am trying to get it installed for our mimakis. I love Caldera over Onyx. I wish I was more IT smart to help you but I am not. Caldera has many options and if you have the money and a printer that can do both rigid and roll to roll then Caldera is...

Jv3-160sp We have a JV3-160SP that is around eight years old. Are you refering to the capping station? Whats happening with your test prints?

I HATE ONYX and trying to get our company to switch to Caldera which in my opinion is far better and user friendly.

tape Painters tape works fine, but like everyone else Ive got litle tabs of all over my machines, I laugh at it sometimes!

Funny stuff That was great! I needed a good laugh. I could watch that all day!

Welcome Welcome from New Orleans!

marks I have had a simular problem. It was in the beginning of the print where the vinyl warmed up and the roller made a indentation. Is your problem different in the sense that the roller mark continues throughout the print? Perhaps it is a dirty roller and could be cleaned with rubbing...

Welcome Welcome from New Orleans, good luck on your install this weekend!

Welcome Welcome from New Orleans, LA.

Onyx Sorry to hear your troubles, I dislike Onyx but have no choice. We are using 10, perhaps you should consider moving up if your a fan of Onyx.