Search results

I did the DNS Changer check and it said I was ok. When I get some time I am going to have to call tech support. Right now I just unplug from the internet when I need to run the FX.

I checked the subnet mask and the ip address and they are both correct in the Edge FX. Guess it is time to call tech support.

Thanks Tony, I will give this a try and let you know.

So last Friday (the 6th) everything was working just fine. Came in yesterday and one of the jobs required the Edge FX, no problem. Set it all up and hit go, nothing happens. After a few minutes GQ Manager gives me a message "Possible Loss of Connection, Attempt to Reconnect" so I hit Yes...

I have tried 3 different brands of 13oz cheaper banner, (yes they are all made in china by the same company I am sure), but I have just found that it is best to watch it and roll out slack in the back. It sucks, but at least I can see the printer from my desk and keep an eye on it.

We just use the back of old flat acrylic sign faces

I was typing while Markus posted. The clips/clamps he suggested are the same ones I was talking about.

I used to have this problem. What I have figured out it this... 1: Make sure that the roll has slack on the back at all times (This way the machine is not pulling the entire weight of the roll) (Downside - You have to look at the printer every few minutes) 2: Use the media clamps 3...

Do you have any color fills or strokes assigned? When I export from Corel as an eps that I am going to cut in omega, I have only a stroke in Corel so I can see it. Once I am in Omega, I take the stroke off and it cuts just fine.

Craig these all look great. I grew up over by Arcola, but have not been through there in a long time. I am sure that the place looks amazing now

Here is a half wrap we did. We used the knifeless tape on the sides.

Custom shape cabinet, LED illumination, white acrylic face, black vinyl

check out http://www.truckads.com I have not used it but we have looked into it

http://artstation-vehicletemplates.com

Moving it would be the best solution. I will have to talk to the client and see if this is an option for them.

We are currently quoting doing frame systems with banners on the sides of 5 - 53' trailers. Some of the trailers have roll-up back doors and some have the hinged swing open doors. On the trailers with the swing doors...on the sides of the trailers there are hooks to hold the doors open. I can...

I am also glad to see N.Glantz in St. Louis. I spoke with Brandon down there and he said they were working on getting a truck running up my way.

Welcome from Illinois.....:Welcome: Check out the Merchant Member Directory. There are quite a few on there that you can outsource your printing.

I have a RAID 10 set up. 4 - 1 TB hard drives. 2 drives are my hard drive and the other 2 are a mirror. Can never have to many backups.

It definitely was not pulled correctly/tight enough. Also that fact that it is black does not help. As it gets hot it will wrinkle, and you will have to go back and tighten it, even if it was pulled tight to begin with.