Search results

I got a set of mid- size a while back for testing. First Impressions where not great but I can see the potential for certain applications. 1/2" sintra would probably work pretty good as long as they are not in the wind. Also recommend screwing the feet to the substrate.

Mickey, I am going to assume this was either a bad experience or completely waist of money. I hear you loud and clear Fred. In the past, I've always found it easier to train someone green. You don't have to break any bad habits. So, does this mean there's no such a thing????

Ooops, I should clarify. I'm pretty comfortable installing vinyl on just about anything. Problem is that I can't find the time to do everything so I'd like to hire someone to do installs. I also don't have the time to train anyone either. Any good installer in town already has a job. In...

I've seen lots of adds for vehicle wrap classes but is there such a thing as just an all around, general install class?

do they make one for beer(s)???

That's quite a problem you've got there. I've moved across the country several times. Both with a partner and without. It sounds like the work situation will be the easiest part to deal with. It's all the other stuff that is difficult - YET FUN & EXCITING. Will you like your new area? What...

+1 I also print my double sided prints with the "centre on media" button checked.

+1 with Malkin. You can also try to rotate the same image to see what's happening. If problem persists after cleaning the encoder, I would suspect the flex cable.

I'm with Gino. Beers all around!!! I'm glad this worked out for you. Cheers

Yup, your boss needs to buy you a big enough table. At least 8 -10' long and little bit wider than your media. IE, if you have a 54" printer, you should have at least a 55" wide table. I use tempered glass for my table top. I like it a lot but I'm sure others don't. Cutting matts also work...

Just talked to a friend/sign guy today and his company is about to pull the trigger on cyrious software. He was very exited about it and he figured it could do everything they need.

OK, so I didn't read the entire thread but I have to say that I absolutely love my Roland SolJet PRO III. Great prints, good speed, low maintenance and it also cuts. I'd buy another one in a heart beat. BUT, I heard from a little birdie that the Pro IV is due to come out in the fall. Might...

Should I be worried about second hand radiation?

Get a 54" cold laminator. I did the Royal Sovereign for the price point. You'll thank me later. Seriously, 54".

Not sure if this helps, but the iphone app "SignGuru" has a great viewing distance chart that I refer to on a regular basis.

Puerto Vallarta is nice but the Mayan Riviera is so much nicer and well worth the extra cost. If you decide to do the Alaskan cruise, you will most likely be in Vancouver for a day or two. PM me and maybe i can tour you around a little. Here's my advice to you. No matter where you go...

I think I just had this same problem as you. In versaworks there's a setting for EPS margin. Mine is set to 0.02. It adds that 0.02 to both sides of the print and scales it accordingly. I freaked out for a while trying to figure out why my prints where reading the wrong size. I did a test...

Is there anything blocking the the safety sensor? Not sure how that model is configured but it may also be a blown fuse.

LOL. When good typos go bad. I'm don't know if head will help with your vinyl problems, but I'm sure YOU will feel better afterwards...

I like it but I think I like my version better. Sorry, couldn't resist.