• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Pulling My Hair Out

    Can you supply us with a little more detail about the job? One long print/cut job or a bunch of 6" decals?? Is the print laminated? What materials being used? Blade type and setting on the Graphtec? I have seen many times where the blade may not be extended out of the blade holder...

  3. Fc3100-60

    Wish you luck. Maybe a board repair tech can help? I have service manual on this unit if they need it. Dont even bother calling Graphtec about the board... Not the same caliber as the ole' FC3100 but I have a 24" CE5000 that I can offer you a good price on. May be about the same price as a...
  4.

    Any Merchant Members who do Edge Printing

    Maybe Fred could help with this one.

  5. Mimaki Pump Mods

    Roland made the change due to their pumps being the weak link in the chain as well. Their new pump design seems to be far superior to any I have seen. When installing the new Roland pump, a firmware change/update is required to eliminate cycling the pump too much. You may be able to somehow...

  6. print-cut software

    What is your expectation of 'Dirt Cheap' ? There is a member here that is selling PRO 10 for a very good price in the Classifieds section. http://www.signs101.com/pp-classifieds/for-sale/p800-flexisign-pro-10.html

  7. Roland CM24

    +1 ($350-$400) Good to have you aboard.

  8. Need advice :cutting a 2'' sphere intwo

    What type of blade was used?

  9. main board

    Wish I could help but not a Roland dealer. I do have some contacts so let me know if you need additional help on this.

  10. main board

    Tripped on cable or possible electrical surge? You might try Florida Graphics. I think they are still a Roland dealer.

  11. main board

    What went wrong?

  12. main board

    A new one? Most any Roland dealers (if they will sell it to you). Otherwise, maybe check with board 'fixers' like 'Jemmings Business Solutions' or 'Grafx Network'... each Merchant Members here.

  13. ROLAND SP 300V any good?

    ask for 6500 and let them keep the daige
  14.

    Serious magenta cast on XC-540

    profile or rendering intents maybe?
  15.

    Serious magenta cast on XC-540

    Nozzle check look good?

  16. ROLAND SP 300V any good?

    +1 for $6-7k

  17. ROLAND SP 300V any good?

    Should work just fine on a PC with XP, VISTA or 7

  18. ROLAND SP 300V any good?

    Yes to all (as long as it is in good shape and maintained well). You will need a RIP for it.

  19. very strange behaviour

    What printer, what version of Flexi? You might also use the step and repeat function in flexi and save the file as a full run... then rip and print that file rather than telling the rip to print multiples.

  20. Ink Color Not Printing-HELP!

    First and foremost, you need to print the TEST PRINT and post it here. That way, we can see if the nozzles are firing correctly. If you get Olive Green when printing Black, you are more than likely not choosing the right color profile in your rip software. Give us some more details please...

  21. I just want my cutter to act like it used to!

    You must get firmware from Signwarehouse for the Q series
Top