Search results

Hingst's Sign Post: Printing Heat Transfer Films with Latex Inks This is a good little article. Can't help with a brand though.

Want to send a layout of what your looking for? I can tell you for sure if we can quote it out for you. It will definitely fit on our table though. eholt05@gmail.com

Not a Merchant Member but we are merchants to the trade. How critical is the 61"? Table is capable of 61" but the end size will be more like 60"

My advice is to turn off the electrical supply first.

Had almost an identical issue had to get cortisone shots to cut the inflammation and get me back to work. Now I just make sure to stretch and work it out in all directions. Hanging from a pullup bar for 5 mins or so seemed to help some also.

The problem isn't probably so much how much your lifting or the ways your lifting/moving but probably more the movements your making. Repetitive similar movements day in and day out can cause issues. When you leave work you need to do more excersize doing motions you don't do throughout the...

Be an adult and figure it out.

Sounds like wrong silicone. Dow Corning 732 is more of a sealent then an adhesive. It has adhesive properties but it's more for seal in place gaskets and sealing industrial equipment. Not for holding plexiglass on the side of a building. I would go with liquidnails Construction Adhesive...

Just FYI this code is not in the book. You might be able to use it to trouble shoot though. If you want me to forward it to you PM me your email. And I will send you a dropsend link.

Sounds like you need to re check you ip address. Since you changed providers the IP address assigned to the Printer is probably now different then when you originally set it up. Go in the front panel of your printer and find the IP/Connectivity or something like that. Find the IP address...

A little large on everything except the text IMO. Also really miss my carbon fiber theme.

Can you send pictures of what your talking about. Maybe the cause is something else.

Why does it matter if they are from portland or not. If your wondering about service. Grimco has had excellent customer service for us. They have a shop right outside of portland so I would think the service level would be about the same.

PM me. Maybe we can take care of you.

Check out Desert Laminator for all your laminating needs. Almost the same as highway handyman. We use the sidewinder and also have a rollsroller

Reset your machine first. There are a couple different forums on resetting a graphtec. turn off/on Press up and enter at same time when turning on. THen go through steps of resetting. Then try again as normal to cut.

Yes. Perf Cut with a red holder and cb15ua. THe cb15ua has different angle giving it more cut area on the blade. If your going to perf through vinyl and backer then you should be using this blade. http://www.graphtecamerica.com/docs/Datasheets/Blade_Holder_Plunger_FAQ_FEB_2016-WEB.pdf

Using unmatched components like a calendared printable vinyl and a cast laminate is probably what they are going to say. You only get the expected life if you use it correctly. 3M, Oracal, Avery all have matched component systems or some derivative of this name. Using materials that expand...

I would keep paying attention to Fred. Maybe you did a piece of his step already but follow everything he says. As he said it could be multiple things and somebody jumping in and saying it is one thing because that happend to them is not going to help you troubleshoot it. If there was an...

And a Merry Christmas to you also Gino and everyone for that matter.