Search results

I use Metalcraft Industries for all of my aluminum blanks including tags. They have a great selection and will also custom cut.

I have noticed my L25500 is leaving a small puddle of ink under the right side... It is running down the right leg to the floor. Any ideas for what this could be? It isn't the waste tank overflowing, I checked that.

That's what I was afraid of. I guess I will just have to make the best of it for now until I can upgrade.

I have a Daige Quickmount III that I got a deal on. I was hoping that it would get me by until I can buy something nicer. I have it up and going, but it is leaving some silvering after I run prints through. I know the bottom roller is soft and I know they recommend using a sled, but I have seen...

Fred is right. It is one of Pierce/RJ Marx's proprietary fonts. You can try to contact RJ Marx and see if they will design what you need and send it to you in an .eps format, but other than that you will not be able to get this font.

Intermediate is out of the question for what I'm using it for, not necessarily air release. I will try the Electrocut, and I'm also going to get a sample of the 180CV3 and see how it looks.

I guess V1 is all I've used then. I know its not a big deal, but seeing the air channels in the finished product always bothered me.

I will give the Electrocut a try. I want to stick with 3M because it is often requested and I run 3M reflective so I normally have the 3M laminate loaded in the laminator. The biggest thing I will be using this for is my fire helmet shields. The air release channels really stand out due to how...

I am needing a latex printable, high performance white 3M vinyl comparable to Oracal 751. I know 180cv3 would work, but I don't need air release and it isn't going to be used for wrapping. It seems like most distributors are trying to push the 180, but it seems like a waste of money for general...

The more I've looked at this thing, the more I am wondering if it is possible to fully wrap? It is the 20 oz. tumbler, and looking at the sides they aren't flat... they are convex.

Re-installing the program worked. Whew, that wasn't a fun way to start the day.

Restoring the file through Avast didn't work, I am in the process of re-downloading the program now.

I am running a full purchased version of Flexi 11 on a Windows 7 laptop. I have had no issues until today. I started up my computer, clicked on the Flexi icon and when it began loading I got three "failed to load plugin module" warnings; fsformat.dll, fspreprod.dll, and fsintpaint.dll. The...

Does anyone have a template for the Yeti tumbler cups, or know where to get them? I was going to just make one but if I could save the time and just buy one that would be great.

I downloaded the 3640 profile from Oracal's website and tried it. Believe it or not it was worse than using the 3M profile! I also tried the HP Adhesive and Briteline profiles. Printing in 1,200 dpi 18 pass with the IJ35 profile seemed to help, but there were still some of the tiny white spots...

The material is Orafol 3640G. I bought it just to use to learn the printer since it is cheap, but I needed some temporary decals and thought it would be great for that. It is the same roll I have been using, which printed great two weeks ago. I also tried 651 which worked a little better but...

You are right, here are some pictures! This is with color correction on, running the 3M IJ35C profile in Flexi, 10 pass low ink bidirectional. The black border is fine, but the black in the file is washed out as is the gold leaf. There are tiny white spots all through the print also. Same...

I fixed the blistering issue. There was a buildup of adhesive where the roller in the printer where the edge of the vinyl always runs. It was pulling the vinyl from the backer. So I fixed that, but now I'm having issues with the prints. The color is off and spotty. The black looks brownish with...

They appear behind the print zone. As the printer is heating and preparing to print everything I can see is fine, but then as it advances the media and starts printing the bubbles start to show up. This media is all new, less than 3 weeks old, and it all printed fine a week ago.

It's a 42" latex L25500 running with Flexi Cloud as the rip. I did not get pictures, but it was a bunch of bubbles and blisters that started at the right side of the material and spread across the full width. The first 6" or so was fine, but then as it started printing and feeding out, the...