• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. _

    Just got the final numbers in from Grimco for 2023 Total rolls used of 54" x 100' was 485 rolls. I was only 136 rolls off in my math

  3. _

    I know we did great. Printed 349 rolls of 54"×100' vinyl

  4. Plastic for Outdoor Real Estate Signs

    I use ACM / Max Metal (aluminum composite material) 3mm for signs in frames and 6mm for hanging signs. Works great on the beach side. Very durable.

  5. Flexi for two printers and cutters?

    I'm currently running three Roland printers and four Graftec cutters on one computer with Flexi 22

  6. XR-640 No Vacuum Power Only When Printing Starts

    I keep the Vaccum setting at 100% on both my XR-640 printers.

  7. Guidance on material thickness

    Harbor Freight $9.99

  8. Graphtec FC9000 Changing Conditions?

    Change the condition back. While pressing enter press 1, 2, 3, 4 or arrow up, down, right or left.
  9.

    Need Help Graphtec Not Cutting in some areas deep enough but can cut deep enough in some.

    I cut on Graftec 8600's and a 9000 all the time in the channel not on the strip. Extra thick material I will do a kiss cut then a regular cut and everything pops out perfectly.

  10. Have ya heard about this.................................................................?

    Monday October 2nd Grimco will take over Tubelite and have a monopoly on the industry. All there sales staff were told Thursday.

  11. Looking for a printable holographic material for eco solvent

    General Formulations has 54" rolls of Holographic vinyl. Tubelite is my supplier, but as of Monday October 2nd Grimco owns Tubelite.
  12.

    Graphtec CE7000 Perf Cut

    Graftec website tutorials should walk you through the install
  13.

    Graphtec CE7000 Perf Cut

    If the media is skewing while cutting, cut shorter sheets or replace the rubber feed rollers. Then, If you can find a push roller assembly and you can program the 7000 to read the extra roller it will work great. If you can't program it shave the sensor tab off and it will great as well.
  14.

    Graphtec CE7000 Perf Cut

    You can Kiss cut the star shape then straight or perf cut a square box around it, your choice. The end user can peel it out of the square.

  15. Looking to buy screen printing eq. Dealer recommendations?

    I'm running a M&R Saturn. Printing on Coloplast, .040 and .080 Styrene.
  16.

    Graphtec CE7000 Perf Cut

    Blade is out too far and too much pressure. Try straight cut instead of perf.

  17. Suggestions Graphtec FC9000-160 Large Window Tint Plotting

    I use Copper Tinsel on my sheet fed presses and screen printing press to eliminate static

  18. Feed Motor error 0008

    Power Down, Restart and reload media. Make sure roll of media is moving freely before loading.

  19. Close Front Cover Message

    For a temporary fix: Unplug the switch and connect the two wires together, this will close the circuit. That switch is there for a reason. REPLACE IT

  20. FlexiPrint Sends Job, Printer Doesn't Print

    This problem happens periodically with my Flexi 21. I have found that by shutting everything down and restarting, everything works great again. Also every two days I deleat all print and cut files that are finished. I have found if I don't everything runs very slow.

  21. Recent problems with Signs365

    Over the last 12 months I have placed 22 banner orders with Signs 365 with a total of 550 banners, No Problems or Mistakes. If I have a question about an order I call them before I click the order button and they talk me thru it. They Are The Best!
Top