Search results

i have been using onyx for years with no issues. it works day in and day out. but with our issue my first thought was a bad ram stick or a bad install. it could be you have a bad sector on your hd. or your anti virus is blocking the program.

its time for a new printhead. how much ml have you pumped through it

well with all hp products the one thing they all need is patients. it takes a few moments for them to sync up when you make a change

i would check it, it might be set up already, but basically you would be telling it what to use so that it never automaticaly changes and screws everything up

you wanna make sure its properly on the network. you want to assign it a static ip address. go into your software and set up the printer with that same ip address

sorry i typed that wrong. it would be 10 base 5 ethernet. or thick ethernet.

well if it is a 15 port connector. i am wondering if its a 10 base t ethernet port. you would need a port on your pc. then a connector and coaxial ethernet cables to connect both of them

just hire a really tall guy. problem solved. since its not a major field. you might be able to talk them into letting you drive your truck to it. might use some old plywood sheets to drive on to protect the ground some

i wouldnt think it was a game port, should be an lpt printer port.

look online for a port driver. make sure windows has that port installed. then install your port driver for your cnc machine.

can your print program create cut reg marks. it may be looking for something thats at a different location than what your printing

ok first question. how was the marks created. what does your cutter do when looking for the mark. is it near it. does it try to read it or just what?

looks like its a language issue. i am guessing your free copy is not in english. or language is selected wrong.

what is the warning you get with the program?

yes they do go away in a short time. working lightly with a soft squeegee helps a lot, work slow and in small swipes. i have a velcro covered squeegee but that leaves a scratched look, i have a nice felt one that i prefer to use

keep in mind its up to the officers to decide if you get a ticket or not. its a judge that decides if you actually violated the law. officers are paid to write tickets so thats just what they do. an officer is not always correct in how he views the law.

i think i looked up the wrong printhead number for you. but they still are not bad princed when you think of how much money they produce. but first you can make sure everything is clean and the printheads are properly aligned here is a link to your manual that gives full instructions on how to...

if you use the hp 940 printheads i think they are like 30 bucks a piece on amazon

i would replace a few of your print heads. even when they test fine i have found they can produce some banding just replace them and fix your problem

slow down. your using onyx 11 you downloaded a substrate profile. which software says its incorrect?