Search results

i would just double check your settings. you can resize an item in cutting master. its worth a double check on your settings, i have to click reset on mine now and then for it to work right.

So i have a graphtec cutter The tyflon strip is starting to show wear and i was wanting to replace it. So i approached my boss about ordering a new one. This was his response "Those things never wear out if its going bad it cause you did something wrong, i am not ordering a new one" I know this...

applying the perf is the biggest task. you need to use a very soft or felt squeegee. work side to side with over lapping slow soft strokes. since your doing it on a flat surface it should be easy if you just relax, breath and take it one step at a time. dont for it or you will cause yourself...

also double check to make sure your machine is docking correctly. the ink caps could be getting worn leaving little gaps in them allowing extra ink to escape. check the sensors make sure they are clean and not out of alignment.

as a current owner of an hp 360. i love the machine. compared to the solvent machines i have owned. it is for the most part issue free. easy to maintain and run. unless your an extremely small shop i would suggest a stand alone cutter. many days i am printing one thing and cutting another. i...

i have the 8000 and i love my old machine. i havent had to repair it in over 3 years, it cuts pretty much exactly the same from day to day. if you set it up right and keep it adjusted and clean its a very reliable machine.

i attached a roll holder to the end of one of my tables that holds my roll of transfer paper. i use both 54" printed material and 30" cut vinyl. so i just buy the 30" rtape and over lap as needed. when i started the boss wanted me to use 48" transfer tape but i never did get that stuff to lay...

you could take the blade out till your ready to cut. not sure what your cutting but my machine never scratches the material

i use the 360 and print on 180-10cv3 also i use the 110 10 pass setting i use and over lam with it and dont have to much issue with whiting it holds it color but if i do stretch a little to much there is a slight color shift

Lag bolts.. if it falls off use lag bolts.

the simple process is, print lam cut. use a vinyl lam combo that is made to work together for the application you need it for. with banners, you have a few options. you can get an old sewing machine and run that route or you can even use a good quality tape product to bind your edges. a small...

one thing you might want to double check. your onyx key. make sure its enabled for a cutter. if its not, it will cause you issues. easy for an onyx rep to fix.

assuming you already have your cutter properly connected. in your cut server window. select the green manage cutter button then add cutter selecting your cutter. back in the manage cutter window select your cutter and configure. select the connection type and any settings you need for your cutter

these buses are what we mainly wrap. the only area we use primer is bottom of the passenger front side where it has that deep recessed area. as far as above the window. its difficalt but if you take a thing strip of material and your finger you can usually work it in. we make cuts at every caulk...

So as always i went on vacation and come back to find my boss has fiddled with stuff. He ended up breaking the hinge latch that holds down the cover over the ink heads. I have ordered a new cover and will install it myself. Just looking for some good hints or tips before i get started. i wasn't...

its printing nothing at all? did you check the manifold for a crack. how did it print right after you replaced the head, did you get any type of print is the machine pumping ink to the head. is it draining from the head do you have bad ink or bad ink card, are you using oem ink basically you...

sounds like the carriage itself is dirty. the machine is picking up the resistance and telling you to clean it.

are you looking for something to use with a design program, or a stand alone cut program. is this just to work with your cutter or do you need it to do print/cut functions.

i believe that is part of the splitting settings. its in the menu on the mutoh, i can not remember exactly where. but yours sounds like its set to on media. it should be set to one of the other settings. Its been a while since i have played with my mutoh, but this is what your looking for, just...

you had problems with your seal? my seal is one of the best laminators i have ever used. it runs and runs and runs. but wear and tare does take it toll on any machine. mine is maybe 5 years old but still looks and runs like it is brand new.