Search results

Thank you for the reply however I am able to print stuff it just wont do the contour cut. I believe if the IP address was wrong it will not print ether or is there two places for the IP address? one for printing and one for cutting?

Hello All, I reset the factory settings on my Roland Print & Cut SC-540 and now it will not let me cut any files... I have rip and cut new file like always and nothing, I have gone into the Queues to reprint and cut an old file and nothing... I have YouTubed it for days and still no luck. When I...

Thank you for your reply, I have tried contacting both however no luck at this time. I have tried YouTube and Google but no luck ether. as for the "modern art" remark.... I think your right at this point.

Hello there, I have a Alpha GD18-E aka "china printer" with software of PhotoPRINT DX11... I can't even get the software to up load. can someone help? This photo is what I get when I hit test print...

Hello! We have an issue with one of our printheads. We have a Roland SC-540 and I'm pretty sure the cyan head is damaged. I've spent a long time looking through the forums and can't really find the answer to my question: Can I just swap the Lc printhead with the Cyan one? I don't have the...

Hello! We have an interesting situation with our printheads and this might have been answered somewhere in these forum. I saw already a similar problem but not exactly the same and wonder if anyone has experienced this exact situation. The Cyan, Magenta and Light-Cyan printheads are creating 2...

Hello guys, so, here's an interesting issue I'm having with my XC-540. We're using eco-solvent ink (Bordeaux) and the ink density settings are for eco-solvent, the dampers are also pretty much brand new. So, here's the thing: a) When printing a narrow image on banner or vinyl, we get a fairly...

I have interchanged / swapped print heads on my old Mutoh several times, even without changing the ranking numbers. Although I was warned several times that it would not work, it worked just fine for me, with no issues at all. My question is if I swap the red and black print heads on my Roland...

I'm getting these lines strange lines WHo knows what are they...? Offsite pic replaced. Please read our rules and instructions on photo posting.

RE: "damper swap" - yes i did with same result, so it's definitely above the head. I also flushed lines with cleaning /pre-fill fluids, drained out large amount of ink to make sure there's no air left in the system and changed ink carts several times. But, as i said, it starts OK and then...

I thought the capping station has no effect while printing, only when in park/ cleaning mode. Isn't?

Hi guys. I was almost ready to replace both of my Black Ink Lines, but decided to ask your opinion first. *Please look at my pictures A. Nozzle check prints - 1 - before cleaning (missing chunks of black color) 2- after light syringe suction, 3 - after printers Group-A cleaning. B. Solid...

Hello everyone Y & M stopped printing cause my printhead cable shorted touching the metal bar (see red arrow). I pulled damaged cable out. Obviously it's a FUSE. My questions: 1. Is it safe to turn the printer ON with 1 cable missing ? 2. Should i try switching the cable from Group C that i...

Problem solved. Thanks

Hi guys One of the sensor color wires on Falcon was loose. I didnt notice it until i replaced HEAD BOARD. Now all it prints are those lines (see below) I followed all tests from the manual, i even replaced both fuses on Main Board, but no improvement. Does anyone knows what else may happened...

Can someone please let me know how to locate a blown printhead fuses on FJ-52 main board ? I do have a schematic, but do not see FUSES... thanks