bubbles

What did I do wrong? I don't remember exactly but I don't think I wet applied this Burgandy vinyl. Only the burgandy is bubbling not the gray. The pan face sat here in my office for a couple weeks before I opened it and lettered it so I don't think it was outgassing? I don't remember if there...

Hey, iam pretty New to Signmaking and iam biting my theeth out with laminating, i mostly Produce motocross Graphics. I have a certain Issue which i cant get along, even my fellow technician from the Company i have my machines from cant help me. I have the Problem that when i laminate certain...

Hello. So it seems ever since it started getting really chilly this winter we've begun having issues with our Orajet 3164m developing bubbles, before we even print onto it, and only partway into the roll too which is very inconvenient. We use an HP Latex 110. The room rarely gets below 40 even...

Help! We make a lot of personalized whiteboards by printing the graphics in HP latex 335 and then laminating with Dry Erease laminate 111 from General Formulations. The problem is that 1 out of 3 whiteboards get wrinkles over time, we often use steel or pvc as the rigid material underneath...

Hi, I have been using Kiian's HI-PRO ink recently on a JV-300 and since then I have a bubble problem that forms on the captop during a long print. The ink seems very easy to lather. Bubbles that form on the captop cling to the head and produce spots and lines on the print. Has anyone had this...

I preassembled this sticker using the registration mark method. What is causing the bubbles around the layers? How can I prevent this, or can it even be prevented? This is my second one, and though this one is slightly better than the first, it's still bad.

I’m looking for some help, please. Recently I printed on 3M IJ180CV3 adhesive vinyl and laminated the prints. The printing was done on a Mimaki CJV 150-160 with Mimaki Inks. We allowed the printed vinyl to outgas for 48 hours before laminating. We then used a Seal 400 laminator to apply premium...

Not sure what to do at this point? We have never had luck laminating anything that is over 36" wide and tend to shy away from jobs that require long vinyl laminates. We have a 62 Seal Pro S which is probably a great laminator, however, we simply cannot seam to figure out how to laminate with...

I am printing on Avery 2920 and installing it onto .060 styrene. It a full digi print, and my table guy is by himself so he installed it wet "splash" The sign looked great, however the next day hundreds of air bubbles showed up making the sign unsellable. Anyone have this problem and how...

Hi everyone. I'm hoping that someone might have a suggestion on where to start with solving my problem. I have a call in to the vendor, but in the meantime...We have an Image 600 laminator that has been leaving small bubbles/air pockets in the laminate every 16-17 inches. This does not seem to...

We make vinyl application tools to fit most vinyl applications. Many of our tools will apply masking and apply vinyl.

The Big Squeegee can help you get professional results with very little experience. It is fast and easy. Large applications made easy.

I recently installed some multi-colored logos on a van and some doors for a friend of mine and there are a LOT of bubbles. I used the layering technique for the multiple colors and many of the bubbles appear to be between the layers of vinyl, not underneath the vinyl on the surface. So I am...

I've had my laminator for probably 4 years now and purchases it as a display model from my dealer. It has always kind of had this issue but I think its getting a little worse and was wondering if anyone has had similar issues or have any advice. The issue is that on some large format pieces...