• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

calibration

  1. Need Help Roland VS-300i print effect (Print Line Offset)

    Hi, My VS300i did not find that the printing effect was not good and was affected when printing large pictures at ordinary times, but problems were found when printing fine lines. The print head was calibrated and aligned, but the lines printed in Scan direction would be offset, and the feed...
  2. Need Help HP FB500 Printhead X Calibration Issue

    Recently we replaced the motherboard and switched out a failed hard drive in our HP FB500. After firing the printer up we noticed the heads were way out of calibration. After some research we attempted to perform the manual X calibrations (see attached photos) and found that we could get the...
  3. HP FB750 Printhead Replacement Repair

    Hello, I have had some issues with my HP FB750 printer for some time. I have tried manually calibrating the printer or doing the automatic calibrations and cannot get better results. After talking with HP support, they recommend that I replace the printheads. The repair cost for the labor seems...
  4. Need Help What are these pink lines? (pics)

    Our pretty new Roland VG-2 just started printing these little "halo's" along the outside edges of the prints. The feed calibration and media gap adjustment (bi-directional) are all calibrated. Nozzle tests are good. The user manual doesn't suggest much beyond those two adjustments. Any insights...
  5. Need Help Bi-Directional issues

    Having a hard time with bi-directional printing lately. We used to only print bi-directional, high scan speed, but lately anything with fine details comes out blurry on bi-directional. I've tried dropPOScorrect but can't seem to get the line to move on pos #1. I've tried greatly exaggerating the...
  6. Need Help Roland Printer: What is going on with these crazy calibration tests

    Been having some banding issues on the Roland TrueVis Vg-540. Today when calibrating the machine, the correct setting was a moving target. it was set to ten, which had a little overlap. Twenty looked good so i dialed it up. Next test print, twenty had a little gap and ten looked right. Set it...
  7. Need Help A3+ UV Epson Dx8 Head Problem print

    Hello.im new here and i hope someone will help me. I got a A3+ UV Printer from china company and i have problems with print.pls check the images anyone can help me to fix this. Im using the software Wellprint XP and for RIP UltraPrint Any calibration tutorial or print files.will help me
  8. Need Help Summa F1612 Conveyor Belt Depth Mapping?

    Hi everybody! I recall there being something in the software for the summa flatbed that maps out the variances in depth on the cutting area to give a better cut but I cant seem to find it. It migth've been on another machine, but I figured I'd ask here because I'm not finding it it myself...
  9. Q: profiling, Roland, custom ICC

    Hello, am seeking guidance in getting better quality / more accurate RGB prints from a Roland 6 color. I have been reviewing different color meters such as the X-Rite etc, though am not sure what others may be relying on to calibrate and create custom profiles for their printers. Can anyone...
  10. HELP! I'm Pulling my hair out trying to fix this overspray issue on my FB700

    As you can hopefully see from the image, there is an over spray in one direction and not the other. This image is flipped 90 degrees so the spray is horizontally not vertically. Ive done everything I can think of to fix it. manual calibrations of bidi, Head-head, jet map. I even wiped the...
  11. Vertical Adjustment Calibration

    Hi all, wondering if anyone could help. Bought a second hand Cadet Sp750c/ Roland SP300v, unfortunately it was not in very good condition. I've replaced wipers, caps, dampers etc.. The black/cyan head was damaged so managed to source the service manual and replace it (with much difficulty...
  12. Mimaki CJV30-130 Calibration Help

    Does anyone know how to calibrate this machine? The operation manual does not state how and no where that I have searched and searched on the internet says how. When trying to cut out circle decals, with registration marks the computer printed out, the machine seems to cut dead on for the first...
  13. fuzzy edges on cmyk blacks...

    I'm noticing a strange thing with my SC545EX printer... Recently, when I print (from flexi)on "normal mode" (720), anything with fine lines or crisp edges, particularly with black and darker colors, the edge seems to have a slight "fuzziness". Seems particularly noticeable when printing...
  14. Choosing the right Input ICC

    A recent Demo on the Epson GS6000 highlighted the importance of getting the Input ICC right. I have always used the ISO coated v4 to get accurate colour. Prints lack POP and I'm looking to find out what you think about ONYXCMY.ICC as an input profile. It looks much bigger on the gammut map...
Top