cutcontour

Hey folks, I have an issue with a label file I've created print and cut on our HP Latex 315 Print & Cut system. For some reason, the die-cutter keeps trying to cut the square twice which is causing it to be torn up and rough on the edges. I thought it had to do with me using an old file and...

Not sure where to post this as I don't know exactly what is causing my problem... For several months I have been experiencing random registration mark detection issues with Caldera and our Graphtec FC8600-160 plotter. This occurs when contour cutting printed vinyl. 90% of the time it works...

I AM EXPORTING MY cOREL dRAW x6 DESIGN TO A .PDF FILE, (WHICH i HAVE DONE FOR DECades) i THEN OPEN IT IN MY oNYX but Onyx is not recognizing my 100% Magenta CutContour line. It shows as a magenta line in onyx but not as a cut line. I have 2 other computers in my network and they work fine! The...

Hi guys im really struggling and am wondering if someone would be able to share some of their expertise with me please - I have the attached PDF which basically consists of lines with a 15px stroke However I want to add a .25 cutcontour line around the outside of everything, I used to use...

I am having an issue with the blade depth on our Summa S2 T160. The job I am trying to setup would be CutContour and then FlexCut with about 1/4" of backer exposed around the sticker (after weeded). The problem I am having is when I set the blade depth to work with the CutContour I cannot get...

I see all these companies coming out with die-cut stickers and decals, like sticker app, Vinyl Bandits, Rockin' Stickers, etc. What material are they using? Maybe something that doesn't have curl. The media I have tends to curl on the edges after a while. I have an HP Latex 360 and a Canon...

I am doing a partial wrap on the sides of a van and wanted to do a contour cut. It's not a complex CutContour, but it is about 123" long. Can my Graphtec FC8600 handle this job? I'm printing on a 54" roll, wish I can print side by side, but I cannot. Pictures attached.

So, one of my employees was having issues the other day, and instead of asking for help, he initializes Versaworks and nukes all the settings! Hard to be mad, he was trying to fix himself, but c'mon! So, I went in, setup all the queues and settings, but now, for some reason, VW will not see...

Any assistance would be greatly appreciated, because the respective manufacturers are unable to assist. Graphtec has a video on their support site, which I believe illustrates Onyx, and has said my issue is a software support issue and Caldera is acting as if this is the first time they are...

I have been using Illustrator to create my art and have loaded in the VersaWorks CutContour. i make my image, then i make the outline and place it in the back with a fill of none, stroke is CutContour. When i bring it to the Roland I don't get the marching red ants that usually indicate the cut...

Hello! I'm new to Versaworks (been using Flexi) and I see that from Flexi there's an option to send the file as a .eps straight to Versaworks. If you're wondering why, I noticed that Versaworks prints the colour much better so I want to switch over. Does anyone know how to do this properly...

Hi all, currently having some issues with our VS-640. Doing some truck lettering and some of the letters aren't fully cut, mostly things like a G or R, letters that are a little more "complex" than say an L or an O. Another issue I'm having is that sometimes when I check off "Cut Image...

Hey guys. I had this set-up on my CS2 for cut contours and now its jsut not working on my illustrator CS3 im under the impression that usualy it had to be a named color "CutContour" and the color dosent really matter i think... i usualy take pink since its easy to identify. Maybe someone can...

I am using Mutoh, Value Jet 1304 Onyx 7 and a Graphtec Cutter I am unable to make 50in panels cut and don't know why? It will cut 49.75in panels but that's it. I also use a 64in Falcon II and all of my past files are set up for it. I would hate to go back and re-layout past jobs just to use...

well, this is going to be the stupid question of the day. I've gone through my manuals for my Versaworks and online instructions and can't get this stupid thing to work. This is what I've done: In Illi, I copy my graphic to a new layer, hide the new layer, select all the contents of the first...