mutoh

Hello signs101 guru's, im having very odd problems with my mutoh valuejet 1324x. i was having 1 in streaks of pink/magenta at the start of my prints and pretty bad banding (pic with the pink and banding) i ended up switching out the dampers and maintenance station. the problem persisted...

Good Day, Been having an amazingly difficult time trying to secure a new carriage belt for our Mutoh Vinyl cutter (VC2-1800 74"). Mutoh cannot sell it to us directly, other vendors do not carry, is out of stock of or cannot order it for us. Does anyone have a spare they are willing to sell or...

LAST CHANCE - It's taking up space and I need it GONE! I have this MUTOH 1204 - 48" PrismJet printer - been sitting for years, powers on, comes with stand, pretty sure the printhead is dried up, capping station is dried up as well, & the pinch rollers are in need of replacement. I got it in a...

We have a 2005 Zund M-800CV for sale. This is the Conveyor style so it will cut unlimited length files. Can be configured for any application desired for any cutting material. It has a camera setup available to read crop marks. Asking $15,000 or best offer. Free to come and inspect and take a...

I just don't use them. for local pick-up only - Murrieta (near Temecula) in Southern California $500 cash for the lot (take all or none) Mutoh Valuejet 1624X - purchased new in 2019 Cold laminator #1 - Royal Sovereign 1650 - purchased new around 2005 Cold laminator #2 - Royal Sovereign 1400...

Hello everyone, I want to tell you about my disastrous experience with my Mutoh plotter. I have a valuejet1324 in Italy and have had some printing defects for some time. At first I thought it was banding and so I contacted Mutoh and they gave me the name of a dealer in my city who also do...

Hello. I am looking for someone using Mutoh MS31, MS41, or DH21 ink that would be willing to test some new smart cards. Preferably someone in the Southern California area - although message us anyways if you are not in southern cali, but could assist remotely. We are currently working on...

Hello! I apologize in advance for how long this post is; I just want to include as much info as may be helpful. SO, I've been an engraver for about 15 years. I also run multiple lasers, screenprint, make photopolymer signs, rubber stamps, etc-basically every single thing but printing. About a...

Hello, I am considering changing my Mimaki cjv-150 for a better print quality machine on fine print details. I am overall satisfied with my machine but since I mostly print small size stickers/product labels it lucks of quality in fine details. I am between Roland vg3-540 and Mutoh 1341sr...

After replacing my printer head, the prints are not sharp anymore. It looks as if air is blown into the ink and makes spray and travel around the print area. I put back the old head and saw the same issue. So bad head is ruled out. The nuzzle check prints fine or the problem is not visible since...

Hi there, I think this might be a common issue but I am unaware of the solution. I'm running a mutoh Valuejet 1614 with a bulk system installed and one of the subtanks isn't refilling (Black). When I try a little charge it gets stuck at 98% I've tried using "tank valve check" and one of them...

I'm using a Mutoh VJ 426 to print gifts on different materials like iron, copper, wood, and fabric. The printer started adding yellow to the design sometimes in places that even didn't have a design. - We had a technician change the CR board. But after a day, we noticed the problem is still...

Preface: I'm a widow trying to do this (my husband took care of the computer stuff!) The Mutoh vendor won't reply...and Mutoh told me to ask the vendor (then hung up!) I temporarily gave up...the printer has been sitting for over a year...I need to set this @$% thing up! Please be gentle with...

Hi All! First of all, I appreciate the advices provided for my first post, they were very welcomed and useful. Now, I need to access MSA to install firmware (through Board wizard) and have seen that the only way is to get access via technician. I am looking for someone that might grant me 1...

Everything that I print that should be blue is coming out purple. When I print a nozzle check it is missing one of the cyan sections. Everything else works great. I changed the maintenance station 2 weeks ago. I've done a lot of cleaning and I let the head soak on a lint free cloth that had...

Hi! Nice reaching y'all from South America. I am taking charge of my father's company (so am very new to all this) and we are looking to do a facelift of printers, which some were in bad shape. We have a Mutoh VJ1624 out of service about a year ago, so we bought new boards and printhead from...

I'm fairly new to this machine, so I've been googling a lot of stuff to learn it. Have the basics down, and everything is fine when I just do a standard cut, but when I do a contour cut, I get double lines. I've already checked to make sure that it's set to single pass, which it is, but it cuts...

Hello, I recently acquired a Mutoh 1614 that has a bulk system installed, I've been having trouble getting it to read the ink smart cards received with 3rd party ink (Jetbest) They've repeatedly sent out replacement cards as well as the original set, but they either come up as ink end...

I use Mutoh Layout & Print2 -> Mutoh Layer Editor as my process for printing on a XPJ 461UF. I've been trying to use the print history in Mutoh Status Monitor for cost estimation of ink, but I noticed something really weird. On a color layer only print, the heaviest 2 ink usages are white...

https://drive.google.com/file/d/1YdzpDPgemT-bks3lP4cxnYDoj6cGbcSe/view?usp=sharing Update: Check out Video above I have attached a video of the noise/vibration we are still experiencing. So far no error codes have been thrown yet. It started several months ago. We have cleaned, greased...