I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
My 1324 will barely print anything at all. I removed the dampers and CMY have 2 colors in them, and K is solid black. K also prints the best. But I am using a lot of C&Y to print some custom Ukrainian flag designs.
Is that a problem with the dampers? If so, is that all I need to replace? Does...
I am going to look at a 2016 HP 315 from the original owner. It has been kept in an extremely clean shop that didn’t use it much per a personal friends information that works at the shop. It is not a sign shop they primarily do embroidery and heat pressing. It has been serviced by an HP tech and...
I have a 24 Inch Wide roll of this Holographic vinyl material. I covered the senor under the pinch rollers to make the machine think it's filling in the width. How can I set the media on the machine to recognize its shorter and also to get it to stop saying undefined media?
I have a client who needs a certain vinyl wrap that I can't replicate the effect with on my printer with a regular blank 3M IJ180. Am I able to print on it and if so what issues can I run into and what profile should I be running?
Hey guys, wondering if I can get any input from any of you have or are currently using the ink adapters to convert to the 1000ML ink bags on your Mutoh printer like in the photo i've attached? My fellers tech who installed my printer (Mutoh 1624X) a few years ago advised me not to do it due to...
Reduced to $5950
Mimaki CJV300-160
High speed print & cut machine.
Low hour machine!
One print head is missing some nozzles, but otherwise a good working machine.
This machine has (2) print heads, and one print head is perfect.
It has a feature to use other nozzles to print the missing ones...
Hi all, I know the chances are slim to none but is there anyone that could help me with the Mutoh VJ1324 ".prnInst" file for Onyx X10?
There's no way to find any legacy support that I could find and I tried, believe me :(
Any help will be massively appreciated/ rewarded! :)
Hello, I've had my Mutoh Valuejet 1324x for about 4 years now and I'm having some issues, hopefully someone can help. I had issues with the ink flow, but I replaced the cap of the maintenance station and fixed that issue. I also replaced the wiper. Now when I print, it starts off good then fades...
After replacing the 4 Head cables I received this error "E075Err Head Temp", cables were not OEM and after putting the Original cables back into the Machine error is gone but I am unable to print anything, nozzle check don't show and no ink is coming out of the head, everything else seems to be...
WTB Mutoh 1614, 1618, 1624, 1636 et all... I know mutoh has a million different 1600mm machine on the market. I love mine but it just put me through an absolute stress fest, Ideally I need another 1614 but the bare bones on these are the same all the way up it seems. PM me here or call me in the...
Hello to you, I have a Mutoh vj 1324x printer with which I print files from illustrator CS6, my questions are that when I try to match the colors of the mutoh palette directly frome the printer (which are in RGB) I does not arrive at the same color. I don't know if the problem comes from...
Hello,
I have a printer Mutoh Valuejet 426uf and recently I changed the printhead, after this I have a big issue with one Cyan color only, the nozzle check sometimes is 100% perfect on it and if I shake all the cartridges when the printer ask for it, all the color remain perfect on nozzle...
I am parting out a Mutoh 1204A with a bad print head. I will offer any part on the machine for a very fair price plus shipping. The machine was working when taken out of service. I will be glad to supply any pictures or videos upon request. I have a video of it powered up to show you that it...
We purchased an HP FB550 in December of 2018, so it is just over 2 years old. It has been a bit of a lemon. We have had thermistor issues, encoder strip issues, but the final straw was an ACM headstrike we had last week. It was our fault (damaged leading edge on ACM) and it lead to the head...
We just randomly lost all of our yellow ink. For some background - I just got this printer fixed after it had been left to sit unused for quite some time. I replaced dampers, o-rings, cap top, and gave it a good cleaning. We got it working again and printed a few things that came out looking...
I was printing an 8' job and it just stopped and didn't finish...
The printer says "print remain: 0.4m". I tried to press Enter but nothing changes.
Does anyone know if I can continue the print job??
So this past weekend had a bit of vinyl printing and must have missed the heat settings, got some tunneling and noticed a few head strikes when I came back to the machine. Looks like it hit in about 4 different spots at different times. So I ran a nozzle check and sure enough there is about 4 to...
Hello everyone,
We got a great deal on a VJ-1624x and I wanted to know what is the difference between VJ-1624x and VJ-1624. We had to replace the print head and I found out that they use the same DX7 epson print head. I have searched and found almost no information about the vj-1624x but a ton...
I replaced the maintenance station and dampers along with the joint going into the Y cartridge holder because it had a leak. Now none of the ink will charge. I've tried many times, both normal and little ink charge and several cleanings. I can pull ink to the head with a syringe but it starts...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.