mutoh

Question for Mutoh Users - I am printing really a simple Vector File that is full Color (Mainly Cyan) - but Flexi rip gets to 70% and then looses Cyan on Mutoh. I thought it was the head, so cleaned and cleaned and cleaned...you get the point...finally today...replaced the head through SW and...

Anyone have a good source for OEM Mutoh 1624x Printhead? Some dealers are charging $2800 - others I’ve seen at $1600.

My cutter will do a print and cut fine with flexi 19 or the original software, but if I just load vinyl into the cutter and send a job to just cut colored vinyl, it rolls the vinyl forward to the end then just does nothing? The motor stays on and it's like it's waiting for a command or...

Hi there. Bit stuck. Was cutting to a Roland (GX500) cutting from a plug in Ai (cs6) My Roland died. A cheap Mutoh Valuecut came up for sale. Before I purchase a few people told me "yes you can get a plug in for this" (still cutting from Adobe illustrator) so I purchased. Do you think I can...

Hi. Is anyone having issues with inks leaking from their Mutoh ValueJet or ExpertJet heads? Especially on recent installed machines (up to 4 months old) or on machines that had a recent damper replacement?

Hello! I am printing with a Mutoh 1624x. While printing anything over 2-3ft I notice that the print color kind of washes out. For example I’ll start printing a nice yellow and once the print gets about 2-3ft long it starts printing like a pastel color yellow. It’s not instant, it a very gradual...

I have a brand new 1641SR. Very few profiles out there for this machine! But what profiles I have found all print light blues and greens with a mottled, faded visual appearance. Very unattractive. Anyone know a solution? TIA!!!

Could someone with a Mutoh 1204 post a picture of your printhead gap on the platen? Attached is a picture of mine, but I’m being told it’s not where it needs to be. I can’t get it any lower!!! I’ve got to get printing!! Haven’t printed in over 2 wks and jobs are backing up!!!

I've had trouble with my 1204 for several weeks now. It would not print yellow at all!!! After researching talking with others in the industry, I purchased and changed all the dampers as well as the maintenance station. I used a syringe to pull inks into the new dampers and have run "little...

Hey all, I'm in a bit of a hard place right now. We have a Mutoh 1608HS Hybrid Eco-Solvent and are in need of ink. After placing an order 6 weeks ago, we found out on Friday that they have discontinued the MP2 inks we use and will not be able to get any more. To make things worse, apparently the...

$200 - you pay s/h Needs: Print head- DF-49684 / Dampers qty 4 / Maint Station- DG-41149

Hi I'm having trouble with my printer and looking to see if someone may be able to help its a mutoh vj1624. The printer recently stopped printing cyan so we took the head out to try to flush it out. After reinstalling the head in the printer it then wouldn't print at all we discovered one of the...

Anybody have one for sale? Or you know where I can order one?

$15,000 Almost new. Only used on a few jobs. Located in Indianapolis, IN Can be seen and operated on site. Pick up only Contact Roger at picturetoartengraving@gmail.com for more info

Due to purchase the new model Mutoh Valujet the old machine has been sold. the buyer did not want to buy the software and the computer. This is the original software + mini Mac from CALDERA. CALDERA Visual RIP 9.20 + Dongle + mini Mac PM me if you are interested.

I'm having a e152 cr base fuse error, is this a fuse on the board I can change or do I have to replace the cr board completly? so I have a update, I replace both fuses on the main board and still same E152 crr base fuse error

Hi I am looking to buy one of the above to make a ICC profile for my Mutoh vj1024, which one would be best. I can get the x-rite ColorMunki Photo for$150.00 2nd or the X-Rite i1 Display Studio for $300. so will both work with my printer? Thank you AD

Hi all, So I am in the market for a new print head for my unicorn VJ-1618. The manual has a part number of DG-41914 (eco solvent). I can google as good as the next guy but some listings say "Mutoh VJ-1618 1624 1638 Printhead" but I know they are different; in addition its a month shipping. To...

I am unable to use settings from Flexi production manager to override Vc-1800 presets. I can choose values from the onboard cutter menu and speed, force, etc. function properly but when trying to use PM19 settings there is no change to the values set in the plotter menu. I would like to be able...

I have a new VCII 1800 that thus far has been a worthless investment. Not to mention customers wondering why I can't get their work out. 1. I cannot get AAS to recognize the alignment marks. In Flexi: - Tried small marks. - Tried large marks. Nothing works. 2. Setting the AAS length/width...